Sensata-Airpax
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
IPA-6-1REG4-52-5.00-01
Se detaljer DataSheets

IPA-6-1REG4-52-5.00-01

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, small package size
Package: SOT-23
Essence: Regulates input voltage to a precise output voltage
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage: 6V to 12V
  • Output Voltage: 5V
  • Maximum Output Current: 100mA
  • Dropout Voltage: 200mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage for better efficiency
  • High precision output voltage regulation
  • Small package size for space-constrained applications

Advantages

  • Precise voltage regulation
  • Small form factor
  • Wide operating temperature range

Disadvantages

  • Limited maximum output current
  • Higher dropout voltage compared to some alternatives

Working Principles

The IPA-6-1REG4-52-5.00-01 is a linear voltage regulator that uses a control loop to maintain a constant output voltage despite changes in the input voltage or load. It achieves this by dissipating excess power as heat to regulate the output voltage.

Detailed Application Field Plans

The IPA-6-1REG4-52-5.00-01 is suitable for various applications requiring a stable 5V power supply, such as: - Battery-powered devices - Sensor modules - Portable consumer electronics

Detailed and Complete Alternative Models

  1. LM7805: A popular linear voltage regulator with similar specifications
  2. MCP1702: Low dropout voltage regulator with comparable performance

This completes the entry for IPA-6-1REG4-52-5.00-01, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af IPA-6-1REG4-52-5.00-01 i tekniske løsninger

  1. What is IPA-6-1REG4-52-5.00-01?

    • IPA-6-1REG4-52-5.00-01 is a specific type of isopropyl alcohol with a defined chemical composition and purity level.

  2. What are the common applications of IPA-6-1REG4-52-5.00-01 in technical solutions?

    • IPA-6-1REG4-52-5.00-01 is commonly used as a solvent for cleaning electronic components, PCBs, and precision instruments. It is also used for degreasing and surface preparation in manufacturing processes.

  3. Is IPA-6-1REG4-52-5.00-01 safe to use on sensitive electronic components?

    • Yes, IPA-6-1REG4-52-5.00-01 is safe for use on most electronic components, but it's important to ensure compatibility with specific materials and follow manufacturer recommendations.

  4. What precautions should be taken when handling IPA-6-1REG4-52-5.00-01?

    • Proper ventilation and personal protective equipment (PPE) such as gloves and goggles should be used when handling IPA-6-1REG4-52-5.00-01 to avoid inhalation and skin contact.

  5. Can IPA-6-1REG4-52-5.00-01 be used for disinfection purposes?

    • While IPA-6-1REG4-52-5.00-01 has some disinfectant properties, it is not typically recommended for general disinfection due to its flammability and potential adverse effects on certain surfaces.

  6. What is the shelf life of IPA-6-1REG4-52-5.00-01?

    • The shelf life of IPA-6-1REG4-52-5.00-01 is typically around 2 years if stored in a cool, dry place and in a tightly sealed container.

  7. Can IPA-6-1REG4-52-5.00-01 be used for removing flux residues from soldering processes?

    • Yes, IPA-6-1REG4-52-5.00-01 is effective for removing flux residues from soldering processes, but compatibility with specific flux types should be verified.

  8. Does IPA-6-1REG4-52-5.00-01 leave any residue after evaporation?

    • IPA-6-1REG4-52-5.00-01 typically evaporates completely without leaving any residue, making it suitable for precision cleaning applications.

  9. What is the recommended storage temperature for IPA-6-1REG4-52-5.00-01?

    • IPA-6-1REG4-52-5.00-01 should be stored at temperatures below 25°C (77°F) to maintain its stability and effectiveness.

  10. Are there any environmental considerations when using IPA-6-1REG4-52-5.00-01?

    • Proper disposal methods should be followed to prevent environmental contamination, and local regulations regarding the use and disposal of IPA-6-1REG4-52-5.00-01 should be adhered to.