STMicroelectronics
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
BYW99W-200
Se detaljer DataSheets

BYW99W-200

Introduction

The BYW99W-200 is a high-performance Schottky diode designed for various electronic applications. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor Diode
  • Use: Rectification, Voltage Clamping, Switching
  • Characteristics: High Efficiency, Low Forward Voltage Drop, Fast Switching Speed
  • Package: TO-247AC
  • Essence: Schottky Diode
  • Packaging/Quantity: Tape & Reel, 50 units per reel

Specifications

  • Voltage Rating: 200V
  • Average Forward Current: 30A
  • Peak Non-Repetitive Surge Current: 300A
  • Operating Temperature Range: -65°C to +175°C
  • Storage Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The BYW99W-200 follows the standard pin configuration for a TO-247AC package: 1. Anode 2. Cathode

Functional Features

  • High Efficiency: The Schottky diode design ensures minimal power loss.
  • Fast Switching Speed: Enables rapid response in switching applications.
  • Low Forward Voltage Drop: Reduces energy dissipation and heat generation.

Advantages and Disadvantages

Advantages

  • High efficiency and fast switching speed
  • Low forward voltage drop
  • Robust surge current capability

Disadvantages

  • Higher cost compared to standard silicon diodes
  • Sensitive to reverse voltage spikes

Working Principles

The BYW99W-200 operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes.

Detailed Application Field Plans

The BYW99W-200 is suitable for a wide range of applications, including: - Power Supplies - Solar Inverters - Motor Drives - Uninterruptible Power Supplies (UPS) - Welding Equipment

Detailed and Complete Alternative Models

  • BYW98-200: Lower voltage rating, suitable for lower power applications
  • BYW99W-100: Lower voltage rating, suitable for lower voltage requirements
  • BYW99W-400: Higher voltage rating, suitable for higher voltage applications

In conclusion, the BYW99W-200 Schottky diode offers high efficiency, fast switching speed, and robust surge current capability, making it ideal for various power electronics applications.

[Word Count: 411]

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af BYW99W-200 i tekniske løsninger

  1. What is the maximum voltage rating of BYW99W-200?

    • The maximum voltage rating of BYW99W-200 is 200 volts.

  2. What is the maximum current rating of BYW99W-200?

    • The maximum current rating of BYW99W-200 is typically around 8 amperes.

  3. What type of diode is BYW99W-200?

    • BYW99W-200 is a fast recovery diode (FRED) designed for high-speed switching applications.

  4. What are the typical applications of BYW99W-200?

    • BYW99W-200 is commonly used in power supplies, inverters, and freewheeling diodes in various technical solutions.

  5. What is the forward voltage drop of BYW99W-200?

    • The forward voltage drop of BYW99W-200 is typically around 0.85 volts at the rated current.

  6. What is the reverse recovery time of BYW99W-200?

    • The reverse recovery time of BYW99W-200 is typically in the range of tens of nanoseconds.

  7. Is BYW99W-200 suitable for high-frequency applications?

    • Yes, BYW99W-200 is designed for high-frequency operation due to its fast recovery characteristics.

  8. Does BYW99W-200 require a heatsink in typical applications?

    • Depending on the specific application and operating conditions, a heatsink may be required to dissipate heat effectively.

  9. Can BYW99W-200 be used in parallel to increase current handling capability?

    • Yes, BYW99W-200 can be used in parallel to increase the overall current handling capability in certain technical solutions.

  10. What are the key considerations for designing with BYW99W-200?

    • Key considerations include thermal management, voltage and current ratings, switching frequency, and proper snubber circuit design to minimize voltage spikes and ringing.