STMicroelectronics
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
STLUX383ATR
Se detaljer DataSheets

STLUX383ATR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, advanced features
  • Package: Small Outline Transistor (SOT)
  • Essence: Power management IC for various applications
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Switching Frequency: 1.2MHz

Detailed Pin Configuration

The STLUX383ATR has a total of 16 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. COMP: Compensation pin
  7. SS: Soft-start pin
  8. PGND: Power ground pin
  9. BST: Boost pin
  10. SW: Switch pin
  11. AGND: Analog ground pin
  12. VREF: Reference voltage pin
  13. CLK: Clock pin
  14. SYNC: Synchronization pin
  15. NC: No connection pin
  16. NC: No connection pin

Functional Features

  • Wide input voltage range allows compatibility with various power sources
  • High efficiency ensures minimal power loss during operation
  • Compact size enables integration into space-constrained designs
  • Advanced features like soft-start and synchronization enhance performance and flexibility
  • Overcurrent and overtemperature protection for reliable operation

Advantages and Disadvantages

Advantages: - High efficiency leads to energy savings - Compact size allows for versatile applications - Advanced features enhance performance and flexibility

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Operating temperature range may restrict usage in extreme environments

Working Principles

The STLUX383ATR is a power management IC that utilizes a boost converter topology. It takes an input voltage within the specified range and converts it to a regulated output voltage. The integrated control circuitry ensures efficient power conversion by adjusting the duty cycle of the internal switch. Various protection mechanisms are implemented to safeguard against overcurrent and overtemperature conditions.

Detailed Application Field Plans

The STLUX383ATR finds applications in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Automotive electronics - Industrial automation

Detailed and Complete Alternative Models

  1. STLUX381ATR: Similar specifications with a lower maximum output current of 500mA
  2. STLUX385ATR: Higher maximum output current of 1.5A with similar characteristics and package
  3. STLUX387ATR: Enhanced features like adjustable switching frequency and additional protection mechanisms

Note: This is not an exhaustive list, and alternative models may vary based on supplier availability.

Word count: 314 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af STLUX383ATR i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of STLUX383ATR in technical solutions:

  1. Q: What is STLUX383ATR? A: STLUX383ATR is a microcontroller from STMicroelectronics that combines an ARM Cortex-M3 core with advanced analog and digital peripherals.

  2. Q: What are the key features of STLUX383ATR? A: Some key features include high-performance analog peripherals, multiple communication interfaces, integrated power management, and a rich set of timers and PWM channels.

  3. Q: What applications can STLUX383ATR be used for? A: STLUX383ATR is suitable for a wide range of applications such as industrial automation, lighting control, motor control, power supplies, and smart energy management systems.

  4. Q: How does STLUX383ATR support industrial automation applications? A: It offers features like high-resolution ADCs, flexible PWM outputs, and communication interfaces (such as UART, SPI, I2C) that enable seamless integration with various sensors, actuators, and communication networks.

  5. Q: Can STLUX383ATR handle motor control applications? A: Yes, it has dedicated motor control peripherals like high-resolution PWMs, encoder interfaces, and position feedback inputs, making it suitable for driving different types of motors.

  6. Q: Does STLUX383ATR support power management functions? A: Yes, it integrates power management features like voltage regulators, brownout detection, and low-power modes, enabling efficient power management in battery-powered or energy-conscious applications.

  7. Q: What development tools are available for programming STLUX383ATR? A: STMicroelectronics provides a comprehensive development ecosystem, including software development kits (SDKs), integrated development environments (IDEs), and programming/debugging tools like ST-LINK.

  8. Q: Can I use STLUX383ATR with other microcontrollers or devices? A: Yes, STLUX383ATR supports various communication interfaces, allowing it to communicate with other microcontrollers, sensors, actuators, and peripheral devices in a system.

  9. Q: Is there any technical support available for STLUX383ATR? A: Yes, STMicroelectronics provides technical documentation, application notes, online forums, and direct support channels to assist developers in using STLUX383ATR effectively.

  10. Q: Where can I find more information about STLUX383ATR? A: You can visit the official STMicroelectronics website, where you will find detailed datasheets, user manuals, application notes, and other resources related to STLUX383ATR.