STMicroelectronics
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
TL432AIL3T
Se detaljer DataSheets

TL432AIL3T

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Reference

Characteristics: - Low voltage shunt regulator - Adjustable output voltage - Precision reference voltage source - High accuracy and stability - Low dynamic impedance - Low temperature coefficient - Wide operating temperature range

Package: SOT-23-3

Essence: The TL432AIL3T is a voltage reference IC that provides a stable and precise reference voltage for various electronic applications.

Packaging/Quantity: The TL432AIL3T is typically sold in reels of 3000 units.

Specifications

  • Reference Voltage Range: 1.24V to 20V
  • Output Current: Up to 100mA
  • Operating Temperature Range: -40°C to +85°C
  • Input Voltage Range: Up to 36V
  • Dropout Voltage: 0.6V (typical)
  • Line Regulation: 0.2% (typical)
  • Load Regulation: 0.4% (typical)

Detailed Pin Configuration

The TL432AIL3T is a three-pin device with the following pin configuration:

  1. REF: Reference Voltage Output
  2. Anode: Anode Terminal
  3. Cathode: Cathode Terminal

Functional Features

  • Voltage Reference: The TL432AIL3T provides a stable and accurate reference voltage that can be adjusted according to the application requirements.
  • Shunt Regulator: It acts as a shunt regulator by maintaining a constant voltage drop across its terminals, ensuring a stable output voltage.
  • Low Dynamic Impedance: The device exhibits low dynamic impedance, allowing it to provide a stable output voltage even under varying load conditions.
  • Temperature Compensation: The TL432AIL3T incorporates temperature compensation techniques to minimize variations in the reference voltage over a wide temperature range.
  • Wide Operating Range: It can operate over a wide temperature range, making it suitable for various industrial and automotive applications.

Advantages

  • High accuracy and stability
  • Adjustable output voltage
  • Low temperature coefficient
  • Wide operating temperature range
  • Small package size (SOT-23-3)
  • Easy to use and integrate into electronic circuits

Disadvantages

  • Limited output current capability (up to 100mA)
  • Dropout voltage of 0.6V may not be suitable for low-power applications with tight power supply constraints

Working Principles

The TL432AIL3T operates as a shunt regulator by maintaining a constant voltage drop across its terminals. It compares the reference voltage at the REF pin with the voltage applied at the Anode terminal. The device adjusts the current flowing through the Cathode terminal to maintain a stable output voltage. By adjusting the resistive divider connected to the REF pin, the output voltage can be set to the desired value within the specified range.

Detailed Application Field Plans

The TL432AIL3T is widely used in various electronic applications, including:

  1. Voltage regulators
  2. Power supplies
  3. Battery chargers
  4. Audio amplifiers
  5. Industrial control systems
  6. Automotive electronics
  7. LED lighting systems
  8. Test and measurement equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the TL432AIL3T are:

  1. TL431AILP: Similar functionality and characteristics, but available in a different package (TO-92).
  2. LM4040CIM3-2.5: Precision voltage reference with fixed output voltage of 2.5V.
  3. LT1236ACS8-10: Ultra-high precision voltage reference with a fixed output voltage of 10V.

These alternative models offer similar features and can be used as substitutes depending on the specific requirements of the application.

Word count: 511 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af TL432AIL3T i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of TL432AIL3T in technical solutions:

  1. Q: What is TL432AIL3T? A: TL432AIL3T is a precision shunt regulator that can be used to regulate voltage in various electronic circuits.

  2. Q: What is the purpose of TL432AIL3T? A: TL432AIL3T is commonly used to provide stable voltage references, voltage clamping, and voltage regulation in electronic systems.

  3. Q: What is the operating voltage range of TL432AIL3T? A: TL432AIL3T operates within a voltage range of 2.5V to 36V.

  4. Q: How does TL432AIL3T achieve voltage regulation? A: TL432AIL3T uses a feedback mechanism to compare the reference voltage with the input voltage and adjusts its resistance to maintain a constant output voltage.

  5. Q: Can TL432AIL3T handle high currents? A: Yes, TL432AIL3T can handle currents up to 100mA, making it suitable for many low-power applications.

  6. Q: Is TL432AIL3T temperature-compensated? A: Yes, TL432AIL3T has built-in temperature compensation, ensuring stable performance over a wide temperature range.

  7. Q: Can TL432AIL3T be used as an adjustable voltage regulator? A: Yes, TL432AIL3T can be used as an adjustable voltage regulator by connecting external resistors to set the desired output voltage.

  8. Q: What are the typical applications of TL432AIL3T? A: TL432AIL3T is commonly used in power supplies, battery chargers, audio amplifiers, and other electronic devices requiring voltage regulation.

  9. Q: Does TL432AIL3T require external components for operation? A: Yes, TL432AIL3T requires a minimum of two external resistors to set the desired output voltage.

  10. Q: Is TL432AIL3T available in different package options? A: Yes, TL432AIL3T is available in various package options, including SOT-23 and TO-92, providing flexibility for different PCB layouts and applications.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.