STMicroelectronics
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
TSV734IQ4T
Se detaljer DataSheets

TSV734IQ4T

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-power, Rail-to-Rail Input/Output, Quad Channel
  • Package: Thin Shrink Small Outline Package (TSSOP)
  • Essence: High-performance operational amplifier
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Input Offset Voltage: ±1mV (maximum)
  • Gain Bandwidth Product: 3MHz (typical)
  • Slew Rate: 1.6V/µs (typical)
  • Input Bias Current: 1pA (typical)
  • Output Current: 60mA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TSV734IQ4T has a quad-channel configuration with the following pinout:

  1. OUT1: Output of Channel 1
  2. IN1-: Inverting Input of Channel 1
  3. IN1+: Non-Inverting Input of Channel 1
  4. VCC: Positive Power Supply
  5. IN2+: Non-Inverting Input of Channel 2
  6. IN2-: Inverting Input of Channel 2
  7. OUT2: Output of Channel 2
  8. GND: Ground
  9. OUT3: Output of Channel 3
  10. IN3-: Inverting Input of Channel 3
  11. IN3+: Non-Inverting Input of Channel 3
  12. NC: No Connection
  13. OUT4: Output of Channel 4
  14. IN4-: Inverting Input of Channel 4
  15. IN4+: Non-Inverting Input of Channel 4

Functional Features

  • Low-power consumption for extended battery life in portable devices
  • Rail-to-Rail input and output capability allows operation at the full supply voltage range
  • Quad-channel configuration enables multiple signal processing in a single IC
  • High gain bandwidth product and fast slew rate for accurate and responsive signal amplification
  • Low input bias current minimizes loading effects on signal sources

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life - Rail-to-Rail input/output allows for maximum signal swing - Quad-channel configuration saves board space and reduces component count - High gain bandwidth product and fast slew rate ensure accurate signal amplification

Disadvantages: - Limited output current may not be suitable for high-power applications - Noisy environments may affect the accuracy of signal amplification

Working Principles

The TSV734IQ4T is an operational amplifier that amplifies small input signals to a higher level. It operates by using a differential amplifier configuration to amplify the voltage difference between its inverting and non-inverting inputs. The amplified output signal is then available at the corresponding output pin.

Detailed Application Field Plans

The TSV734IQ4T is commonly used in various applications, including but not limited to: - Audio amplification in portable devices such as smartphones and tablets - Signal conditioning in sensor interfaces - Active filters and equalizers in audio systems - Voltage and current measurement circuits - Industrial control systems

Detailed and Complete Alternative Models

  1. LM324: Quad Operational Amplifier, DIP package
  2. MCP6004: Quad Operational Amplifier, SOT-23 package
  3. TL074: Quad JFET Input Operational Amplifier, SOIC package
  4. AD8629: Precision Rail-to-Rail Operational Amplifier, MSOP package
  5. MAX44246: Low-Power, Single-Supply, Rail-to-Rail Op Amp, TDFN package

These alternative models offer similar functionality and can be considered as substitutes for the TSV734IQ4T in various applications.

Word count: 446 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af TSV734IQ4T i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of TSV734IQ4T in technical solutions:

  1. Q: What is TSV734IQ4T? A: TSV734IQ4T is a quad-channel, low-voltage, rail-to-rail output operational amplifier (op-amp) designed for various applications.

  2. Q: What is the supply voltage range for TSV734IQ4T? A: The supply voltage range for TSV734IQ4T is typically between 1.8V and 5.5V.

  3. Q: What is the maximum output current of TSV734IQ4T? A: The maximum output current of TSV734IQ4T is typically 60mA.

  4. Q: Can TSV734IQ4T operate in single-supply mode? A: Yes, TSV734IQ4T can operate in both single-supply and dual-supply modes.

  5. Q: What is the input offset voltage of TSV734IQ4T? A: The input offset voltage of TSV734IQ4T is typically 1mV.

  6. Q: Is TSV734IQ4T suitable for low-power applications? A: Yes, TSV734IQ4T is designed for low-power applications and has a low quiescent current consumption.

  7. Q: What is the bandwidth of TSV734IQ4T? A: The bandwidth of TSV734IQ4T is typically 1MHz.

  8. Q: Can TSV734IQ4T drive capacitive loads? A: Yes, TSV734IQ4T is capable of driving capacitive loads up to a certain limit.

  9. Q: Does TSV734IQ4T have built-in protection features? A: Yes, TSV734IQ4T has built-in features like thermal shutdown and short-circuit protection.

  10. Q: What are some typical applications of TSV734IQ4T? A: TSV734IQ4T can be used in various applications such as sensor interfaces, battery-powered systems, portable devices, and audio amplification.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.