Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
VNQ600PTR-E

VNQ600PTR-E

Product Overview

  • Category: Integrated Circuit
  • Use: Power Driver for Automotive Applications
  • Characteristics: High Current Capability, Low Saturation Voltage, Overtemperature Shutdown, Short-Circuit Protection
  • Package: PowerSSO-36
  • Essence: This product is a power driver integrated circuit designed specifically for automotive applications. It provides high current capability and low saturation voltage, ensuring efficient power delivery in various automotive systems.
  • Packaging/Quantity: The VNQ600PTR-E is available in a PowerSSO-36 package and is typically sold in reels of 250 units.

Specifications

  • Supply Voltage: 5V to 36V
  • Output Current: Up to 20A
  • Operating Temperature Range: -40°C to +150°C
  • Standby Current: 10µA (max)
  • Short-Circuit Current Limit: 30A (typ)
  • Overtemperature Shutdown Threshold: 165°C (typ)

Detailed Pin Configuration

The VNQ600PTR-E features a PowerSSO-36 package with the following pin configuration:

  1. IN1: Input control signal 1
  2. IN2: Input control signal 2
  3. IN3: Input control signal 3
  4. GND: Ground
  5. OUT1: Output channel 1
  6. OUT2: Output channel 2
  7. OUT3: Output channel 3
  8. VCC: Supply voltage
  9. DIAG: Diagnostic output
  10. EN: Enable input
  11. NC: No connection
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection
  17. NC: No connection
  18. NC: No connection
  19. NC: No connection
  20. NC: No connection
  21. NC: No connection
  22. NC: No connection
  23. NC: No connection
  24. NC: No connection
  25. NC: No connection
  26. NC: No connection
  27. NC: No connection
  28. NC: No connection
  29. NC: No connection
  30. NC: No connection
  31. NC: No connection
  32. NC: No connection
  33. NC: No connection
  34. NC: No connection
  35. NC: No connection
  36. NC: No connection

Functional Features

  • High current capability allows for driving various loads in automotive systems.
  • Low saturation voltage minimizes power losses and improves overall efficiency.
  • Overtemperature shutdown protects the device from excessive heat, ensuring safe operation.
  • Short-circuit protection prevents damage to the circuit in case of a fault.

Advantages and Disadvantages

Advantages: - High current capability enables driving demanding loads. - Low saturation voltage reduces power dissipation. - Overtemperature shutdown ensures safe operation even under extreme conditions. - Short-circuit protection prevents damage to the circuit.

Disadvantages: - Limited number of output channels (3 in total). - Relatively high standby current compared to some alternative models.

Working Principles

The VNQ600PTR-E is designed to drive resistive, inductive, and capacitive loads in automotive applications. It utilizes internal power MOSFETs to switch the load current on and off based on the input control signals. The device incorporates protection features such as overtemperature shutdown and short-circuit protection to safeguard the circuit and connected components.

Detailed Application Field Plans

The VNQ600PTR-E is commonly used in various automotive applications, including:

  1. Automotive lighting systems
  2. Motor control for HVAC systems
  3. Power distribution modules
  4. Electric power steering systems
  5. Automotive door control modules

Detailed and Complete Alternative Models

  1. VNQ600P-E: Similar to VNQ600PTR-E, but without the overtemperature shutdown feature.
  2. VNQ600PTRE: Similar to VNQ600PTR-E, but with a different pin configuration (PowerSSO-36N package).
  3. VNQ600PT: Similar to VNQ600PTR-E, but without the diagnostic output feature.

These alternative models offer similar functionality and can be considered as replacements for the VNQ600PTR-E depending on specific application requirements.

Word count: 507 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af VNQ600PTR-E i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of VNQ600PTR-E in technical solutions:

  1. Question: What is VNQ600PTR-E?
    - Answer: VNQ600PTR-E is a high-side driver IC designed for automotive applications, specifically for driving resistive, capacitive, and inductive loads.

  2. Question: What is the maximum load current that VNQ600PTR-E can handle?
    - Answer: VNQ600PTR-E can handle a maximum load current of 4A.

  3. Question: Can VNQ600PTR-E be used for both AC and DC loads?
    - Answer: Yes, VNQ600PTR-E can be used for both AC and DC loads.

  4. Question: What is the input voltage range for VNQ600PTR-E?
    - Answer: The input voltage range for VNQ600PTR-E is from 5V to 36V.

  5. Question: Is VNQ600PTR-E suitable for automotive applications?
    - Answer: Yes, VNQ600PTR-E is specifically designed for automotive applications and meets the required automotive standards.

  6. Question: Can VNQ600PTR-E handle short-circuit protection?
    - Answer: Yes, VNQ600PTR-E has built-in short-circuit protection to prevent damage to the device and the load.

  7. Question: Does VNQ600PTR-E have thermal shutdown protection?
    - Answer: Yes, VNQ600PTR-E has thermal shutdown protection to prevent overheating and ensure safe operation.

  8. Question: Can VNQ600PTR-E be controlled using a microcontroller?
    - Answer: Yes, VNQ600PTR-E can be easily controlled using a microcontroller through its logic-level inputs.

  9. Question: What is the operating temperature range for VNQ600PTR-E?
    - Answer: The operating temperature range for VNQ600PTR-E is from -40°C to 150°C.

  10. Question: Can VNQ600PTR-E be used in industrial applications?
    - Answer: Yes, VNQ600PTR-E can be used in various industrial applications where driving high-current loads is required.

Please note that these answers are general and may vary depending on the specific application and requirements.