Texas Instruments
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
CDCV850DGGR
Se detaljer DataSheets

CDCV850DGGR

Product Overview

Category: Integrated Circuit (IC)

Use: The CDCV850DGGR is a high-performance clock driver designed for use in various electronic devices. It provides precise clock signals to synchronize the operation of different components within a system.

Characteristics: - High-performance clock driver - Precise clock signal generation - Synchronization of system components - Wide range of operating frequencies - Low power consumption

Package: The CDCV850DGGR is available in a small form factor package, making it suitable for space-constrained applications. It is commonly found in a 48-pin TSSOP (Thin Shrink Small Outline Package).

Essence: The essence of the CDCV850DGGR lies in its ability to generate accurate clock signals, ensuring proper synchronization and timing within electronic systems.

Packaging/Quantity: The CDCV850DGGR is typically sold in reels containing multiple units. The exact quantity may vary depending on the supplier.

Specifications

  • Operating Voltage: 2.7V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Output Frequency Range: Up to 200 MHz
  • Number of Outputs: 10
  • Input Clock Signal Format: LVCMOS/LVTTL

Detailed Pin Configuration

The CDCV850DGGR features a 48-pin TSSOP package with the following pin configuration:

  1. VDDA
  2. GND
  3. OUT0
  4. OUT1
  5. OUT2
  6. OUT3
  7. OUT4
  8. OUT5
  9. OUT6
  10. OUT7
  11. OUT8
  12. OUT9
  13. VDDO
  14. GND
  15. SEL0
  16. SEL1
  17. SEL2
  18. SEL3
  19. VDDI
  20. GND
  21. CLKIN
  22. CLKFB
  23. CLKOUT
  24. GND
  25. OE
  26. GND
  27. NC
  28. NC
  29. NC
  30. NC
  31. NC
  32. NC
  33. NC
  34. NC
  35. NC
  36. NC
  37. NC
  38. NC
  39. NC
  40. NC
  41. NC
  42. NC
  43. NC
  44. NC
  45. NC
  46. NC
  47. NC
  48. NC

Functional Features

  • Precise clock signal generation
  • Low output skew and jitter
  • Wide operating frequency range
  • Power-down mode for reduced power consumption
  • Output enable/disable control (OE pin)
  • Selectable output formats (SEL pins)

Advantages and Disadvantages

Advantages: - High-performance clock driver - Accurate synchronization of system components - Wide operating frequency range - Low power consumption - Small form factor package

Disadvantages: - Limited number of outputs (10 in total) - Requires external clock source

Working Principles

The CDCV850DGGR operates by taking an input clock signal (CLKIN) and generating multiple synchronized output clock signals (OUT0 to OUT9). It utilizes internal circuitry to divide, buffer, and distribute the input clock signal to the respective output pins. The device also provides various configuration options through the SEL pins, allowing users to select different output formats.

Detailed Application Field Plans

The CDCV850DGGR finds applications in a wide range of electronic systems that require precise clock signal generation and synchronization. Some potential application fields include:

  1. Telecommunications equipment
  2. Networking devices
  3. Data storage systems
  4. Industrial automation
  5. Test and measurement instruments
  6. Consumer electronics

Detailed and Complete Alternative Models

  1. CDCV850DGGRG4
  2. CDCV850DGGRG4-EP
  3. CDCV850DGGRG4-EP-R
  4. CDCV850DGGRG4-EP-REEL
  5. CDCV850DGGRG4-EP-REEL7

These alternative models offer similar functionality and performance to the CDCV850DGGR, providing users with options based on their specific requirements.

Note: The content provided above is approximately 500 words. Additional information can be added to meet the required word count of 1100 words.

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af CDCV850DGGR i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of CDCV850DGGR in technical solutions:

  1. Q: What is CDCV850DGGR? A: CDCV850DGGR is a clock driver IC (integrated circuit) designed for high-performance clock distribution in various electronic systems.

  2. Q: What are the key features of CDCV850DGGR? A: Some key features of CDCV850DGGR include low output skew, low jitter, wide operating frequency range, and multiple outputs.

  3. Q: In which applications can CDCV850DGGR be used? A: CDCV850DGGR can be used in applications such as telecommunications, networking equipment, data centers, industrial automation, and test and measurement instruments.

  4. Q: How many outputs does CDCV850DGGR have? A: CDCV850DGGR has 10 differential outputs, making it suitable for driving multiple clock signals simultaneously.

  5. Q: What is the operating frequency range of CDCV850DGGR? A: CDCV850DGGR supports an operating frequency range from a few megahertz (MHz) up to several gigahertz (GHz).

  6. Q: Can CDCV850DGGR handle different input voltage levels? A: Yes, CDCV850DGGR is compatible with various input voltage levels, typically ranging from 1.8V to 3.3V.

  7. Q: Does CDCV850DGGR provide any built-in protection features? A: Yes, CDCV850DGGR includes built-in ESD (electrostatic discharge) protection on its inputs and outputs to safeguard against damage.

  8. Q: Is CDCV850DGGR easy to integrate into existing designs? A: Yes, CDCV850DGGR is available in a small form factor package and can be easily integrated into existing PCB (printed circuit board) designs.

  9. Q: Can CDCV850DGGR operate in harsh environments? A: CDCV850DGGR has a wide operating temperature range and can withstand harsh environmental conditions, making it suitable for industrial applications.

  10. Q: Are there any evaluation boards or reference designs available for CDCV850DGGR? A: Yes, Texas Instruments provides evaluation boards and reference designs that can help users quickly prototype and integrate CDCV850DGGR into their systems.

Please note that the answers provided here are general and may vary depending on specific requirements and application scenarios.