SN65ELT20DGK

Product Overview

• Category: Integrated Circuit
• Use: Signal Conditioning
• Characteristics: High-speed, Low-power, Differential Line Driver and Receiver
• Package: MSOP-8
• Essence: Amplifies and transmits differential signals over long distances
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: 3V to 3.6V
• Operating Temperature Range: -40°C to +85°C
• Data Rate: Up to 2.5 Gbps
• Input Common Mode Voltage Range: -1V to +3.7V
• Output Voltage Swing: 400mV to 1800mV
• Power Consumption: 10mW (typical)

Pin Configuration

The SN65ELT20DGK has a total of 8 pins arranged as follows:

```

---

| | --| VCC GND |-- Pin 1: Ground --| AOUTB AOUT|-- Pin 2: Differential Output A --| BIN AIN |-- Pin 3: Differential Input B --| BOUT BIN |-- Pin 4: Differential Input A --| AIN BOUT|-- Pin 5: Differential Output B --| /EN VCC |-- Pin 6: Enable Input --| GND /ENB |-- Pin 7: Enable Input B |___________| ```

Functional Features

• High-speed differential line driver and receiver
• Converts single-ended signals to differential signals and vice versa
• Provides amplification and equalization for long-distance signal transmission
• Supports data rates up to 2.5 Gbps
• Low power consumption for energy-efficient operation
• Wide input common mode voltage range for compatibility with various signal levels

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Low power consumption - Wide input voltage range - Small package size for space-constrained applications

Disadvantages: - Limited to differential signal conditioning only - Requires external enable signals for operation

Working Principles

The SN65ELT20DGK is designed to amplify and transmit differential signals over long distances. It operates by converting single-ended signals into differential signals using internal amplifiers. The differential outputs are then transmitted through a balanced transmission line, which helps in reducing noise and improving signal integrity.

The device also provides equalization to compensate for signal degradation caused by long-distance transmission. This ensures that the received signal remains accurate and reliable.

Detailed Application Field Plans

The SN65ELT20DGK finds applications in various fields where high-speed, long-distance signal transmission is required. Some of the common application areas include:

1. Telecommunications: Used in high-speed data communication systems, such as fiber optic networks and Ethernet connections.
2. Industrial Automation: Enables reliable transmission of control signals in industrial automation systems, such as PLCs (Programmable Logic Controllers) and motor drives.
3. Medical Equipment: Facilitates the transmission of vital signs and diagnostic data in medical devices, such as patient monitors and imaging systems.
4. Automotive Electronics: Supports high-speed data communication in automotive applications, including infotainment systems and advanced driver-assistance systems (ADAS).

Detailed and Complete Alternative Models

1. SN65ELT22DGK: Similar to SN65ELT20DGK but with higher data rate support up to 5 Gbps.
2. SN65ELT23DGK: Differential line driver and receiver with integrated ESD protection.
3. SN65ELT24DGK: Low-power differential line driver and receiver with reduced power consumption.

These alternative models offer similar functionality to the SN65ELT20DGK but with specific differences in terms of data rate, ESD protection, and power consumption.

Word count: 498 words