Texas Instruments
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
SN74ALS576BDWG4
Se detaljer DataSheets

SN74ALS576BDWG4

Product Overview

  • Category: Integrated Circuit
  • Use: Logic Device
  • Characteristics: Advanced Low-Power Schottky (ALS) Technology
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: High-performance octal D-type flip-flop with transparent latch
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Output Current: ±24mA
  • Propagation Delay Time: 7ns (typical)
  • Output Type: Tri-State

Detailed Pin Configuration

The SN74ALS576BDWG4 has a total of 20 pins. The pin configuration is as follows:

  1. GND (Ground)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. CLK (Clock Input)
  11. OE (Output Enable)
  12. Q0 (Flip-Flop Output 0)
  13. Q1 (Flip-Flop Output 1)
  14. Q2 (Flip-Flop Output 2)
  15. Q3 (Flip-Flop Output 3)
  16. Q4 (Flip-Flop Output 4)
  17. Q5 (Flip-Flop Output 5)
  18. Q6 (Flip-Flop Output 6)
  19. Q7 (Flip-Flop Output 7)
  20. VCC (Supply Voltage)

Functional Features

The SN74ALS576BDWG4 is a high-performance octal D-type flip-flop with transparent latch. It features advanced low-power Schottky (ALS) technology, which provides improved speed and power efficiency compared to standard TTL logic devices. The transparent latch allows the input data to be latched onto the outputs when the clock signal is high.

Advantages and Disadvantages

Advantages: - High-performance ALS technology for improved speed and power efficiency - Octal design allows for multiple data inputs and outputs - Tri-State output allows for easy interfacing with other devices - Wide operating temperature range for versatile applications

Disadvantages: - Limited supply voltage range (4.5V to 5.5V) - Propagation delay time may not be suitable for ultra-high-speed applications

Working Principles

The SN74ALS576BDWG4 operates based on the principles of digital logic. When the clock signal is high, the input data is latched onto the outputs. The tri-state output allows the device to be in a high-impedance state when the output is not required. This feature enables easy interfacing with other devices without causing conflicts on the bus.

Detailed Application Field Plans

The SN74ALS576BDWG4 is commonly used in various applications that require high-speed data storage and retrieval. Some potential application fields include:

  1. Data communication systems
  2. Microprocessor-based systems
  3. Memory modules
  4. Industrial control systems
  5. Automotive electronics

Detailed and Complete Alternative Models

  1. SN74ALS574BDWG4: Octal D-type flip-flop with non-inverting outputs
  2. SN74ALS577BDWG4: Octal D-type flip-flop with clock enable
  3. SN74ALS578BDWG4: Octal D-type flip-flop with clock enable and reset

These alternative models offer similar functionality to the SN74ALS576BDWG4 but may have additional features or different pin configurations to suit specific application requirements.

Word count: 408 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af SN74ALS576BDWG4 i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of SN74ALS576BDWG4:

  1. Q: What is SN74ALS576BDWG4? A: SN74ALS576BDWG4 is a specific model of integrated circuit (IC) that belongs to the ALS family of logic devices.

  2. Q: What is the function of SN74ALS576BDWG4? A: SN74ALS576BDWG4 is an octal D-type flip-flop with a transparent latch. It can store and control the flow of digital data in electronic systems.

  3. Q: What is the voltage range supported by SN74ALS576BDWG4? A: SN74ALS576BDWG4 operates within a voltage range of 4.5V to 5.5V.

  4. Q: How many flip-flops are there in SN74ALS576BDWG4? A: SN74ALS576BDWG4 consists of eight individual D-type flip-flops.

  5. Q: What is the maximum clock frequency supported by SN74ALS576BDWG4? A: SN74ALS576BDWG4 can operate at a maximum clock frequency of 25 MHz.

  6. Q: Can SN74ALS576BDWG4 be used for both synchronous and asynchronous applications? A: Yes, SN74ALS576BDWG4 can be used in both synchronous and asynchronous applications depending on the system requirements.

  7. Q: What is the output drive capability of SN74ALS576BDWG4? A: SN74ALS576BDWG4 has a typical output drive capability of ±24 mA.

  8. Q: Does SN74ALS576BDWG4 have any built-in protection features? A: Yes, SN74ALS576BDWG4 has built-in protection against electrostatic discharge (ESD) and latch-up.

  9. Q: Can SN74ALS576BDWG4 be cascaded to increase the number of flip-flops? A: Yes, SN74ALS576BDWG4 can be cascaded with other similar devices to increase the number of flip-flops in a system.

  10. Q: What are some typical applications of SN74ALS576BDWG4? A: SN74ALS576BDWG4 is commonly used in various digital systems such as data storage, address decoding, counters, registers, and control circuits.

Please note that these answers are general and may vary depending on specific design considerations and requirements.