SN74LVC574AQPWREP

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Flip-Flop
• Characteristics: Low-voltage, high-speed, octal D-type flip-flop with 3-state outputs
• Package: TSSOP (Thin Shrink Small Outline Package)
• Essence: This IC is designed to store and transfer data in electronic circuits.
• Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

• Supply Voltage Range: 1.65V to 3.6V
• High-Level Input Voltage: 2V to VCC + 0.5V
• Low-Level Input Voltage: -0.5V to 0.8V
• High-Level Output Voltage: VCC - 0.4V
• Low-Level Output Voltage: 0.4V
• Maximum Clock Frequency: 200MHz
• Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The SN74LVC574AQPWREP has a total of 20 pins. The pin configuration is as follows:

1. GND (Ground)
2. D0 (Data Input 0)
3. D1 (Data Input 1)
4. D2 (Data Input 2)
5. D3 (Data Input 3)
6. D4 (Data Input 4)
7. D5 (Data Input 5)
8. D6 (Data Input 6)
9. D7 (Data Input 7)
10. OE (Output Enable)
11. CP (Clock Pulse)
12. MR (Master Reset)
13. Q0 (Flip-Flop Output 0)
14. Q1 (Flip-Flop Output 1)
15. Q2 (Flip-Flop Output 2)
16. Q3 (Flip-Flop Output 3)
17. Q4 (Flip-Flop Output 4)
18. Q5 (Flip-Flop Output 5)
19. Q6 (Flip-Flop Output 6)
20. VCC (Supply Voltage)

Functional Features

• Octal D-type flip-flop with 3-state outputs
• Non-inverting outputs for direct interface with other TTL or CMOS logic
• High-speed operation, suitable for applications requiring fast data transfer
• Low-voltage operation, making it compatible with a wide range of electronic systems
• 3-state outputs allow multiple devices to share a common bus

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data transfer - Low-voltage operation allows compatibility with various systems - 3-state outputs facilitate bus sharing in complex circuits

Disadvantages: - Limited operating temperature range (-40°C to 85°C) - Requires careful handling due to the small package size

Working Principles

The SN74LVC574AQPWREP is a flip-flop IC that stores and transfers data based on clock pulses. When the clock pulse is applied, the input data is latched and stored in the flip-flop. The stored data can then be accessed through the output pins. The output enable (OE) pin controls the state of the outputs, allowing them to be either active or in a high-impedance state.

Detailed Application Field Plans

The SN74LVC574AQPWREP is commonly used in various electronic applications, including: 1. Microcontrollers and microprocessors 2. Data storage systems 3. Communication devices 4. Industrial automation 5. Automotive electronics

Detailed and Complete Alternative Models

1. SN74LVC574APWREP
2. SN74LVC574ADBR
3. SN74LVC574ADGVR
4. SN74LVC574APWRG4
5. SN74LVC574ADBRG4

These alternative models offer similar functionality and characteristics to the SN74LVC574AQPWREP, providing options for different package types or quantities.

Word count: 430 words