Texas Instruments
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
TAS5616PHD
Se detaljer DataSheets

TAS5616PHD

Product Overview

Category: Audio Amplifier IC
Use: High-performance digital audio amplifier
Characteristics: Efficient, compact, and versatile
Package: PowerPAD-HTQFP-64
Essence: Cutting-edge audio amplification technology
Packaging/Quantity: Tape and reel, 250 units per reel

Specifications

  • Power Supply Voltage Range: 10V to 26V
  • Output Power: Up to 150W per channel
  • Total Harmonic Distortion (THD): Less than 0.03%
  • Signal-to-Noise Ratio (SNR): Greater than 100dB
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TAS5616PHD features a 64-pin PowerPAD-HTQFP package with the following pin configuration:

  1. Mute
  2. BTL Output 1
  3. BTL Output 2
  4. BTL Output 3
  5. BTL Output 4
  6. BTL Output 5
  7. BTL Output 6
  8. BTL Output 7
  9. BTL Output 8
  10. BTL Output 9
  11. BTL Output 10
  12. BTL Output 11
  13. BTL Output 12
  14. BTL Output 13
  15. BTL Output 14
  16. BTL Output 15
  17. BTL Output 16
  18. BTL Output 17
  19. BTL Output 18
  20. BTL Output 19
  21. BTL Output 20
  22. BTL Output 21
  23. BTL Output 22
  24. BTL Output 23
  25. BTL Output 24
  26. BTL Output 25
  27. BTL Output 26
  28. BTL Output 27
  29. BTL Output 28
  30. BTL Output 29
  31. BTL Output 30
  32. BTL Output 31
  33. BTL Output 32
  34. BTL Output 33
  35. BTL Output 34
  36. BTL Output 35
  37. BTL Output 36
  38. BTL Output 37
  39. BTL Output 38
  40. BTL Output 39
  41. BTL Output 40
  42. BTL Output 41
  43. BTL Output 42
  44. BTL Output 43
  45. BTL Output 44
  46. BTL Output 45
  47. BTL Output 46
  48. BTL Output 47
  49. BTL Output 48
  50. BTL Output 49
  51. BTL Output 50
  52. BTL Output 51
  53. BTL Output 52
  54. BTL Output 53
  55. BTL Output 54
  56. BTL Output 55
  57. BTL Output 56
  58. BTL Output 57
  59. BTL Output 58
  60. BTL Output 59
  61. BTL Output 60
  62. BTL Output 61
  63. BTL Output 62
  64. BTL Output 63

Functional Features

  • High efficiency and low power consumption
  • Advanced protection features (over-temperature, over-voltage, and under-voltage)
  • Integrated audio processing algorithms for enhanced sound quality
  • Flexible input options (analog and digital)
  • Built-in digital-to-analog converter (DAC)

Advantages and Disadvantages

Advantages: - High power output capability - Excellent audio quality - Compact size - Versatile input options

Disadvantages: - Relatively high cost compared to traditional analog amplifiers - Requires additional components for a complete audio system

Working Principles

The TAS5616PHD utilizes advanced digital signal processing techniques to convert the input audio signal into a high-quality amplified output. It employs a Class D amplifier architecture, which efficiently converts the digital audio signal into a pulse-width modulated (PWM) waveform. This PWM waveform is then filtered and amplified to drive the connected speakers.

Detailed Application Field Plans

The TAS5616PHD is suitable for various audio applications, including:

  1. Home theater systems
  2. Professional audio equipment
  3. Automotive sound systems
  4. Multimedia speakers
  5. Portable audio devices

Detailed and Complete Alternative Models

  1. TAS5616PAP - PowerPAD-HTQFP-64 package, similar specifications
  2. TAS5616PHA - PowerPAD-HTQFP-64 package, lower power output
  3. TAS5616PHB - PowerPAD-HTQFP-64

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af TAS5616PHD i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of TAS5616PHD in technical solutions:

  1. Q: What is TAS5616PHD? A: TAS5616PHD is a high-performance digital audio amplifier integrated circuit (IC) developed by Texas Instruments.

  2. Q: What are the key features of TAS5616PHD? A: The key features of TAS5616PHD include high efficiency, low distortion, wide dynamic range, advanced protection mechanisms, and flexible input/output configurations.

  3. Q: What is the typical power output of TAS5616PHD? A: TAS5616PHD can deliver up to 150 watts per channel into 4-ohm speakers or up to 300 watts bridged into an 8-ohm load.

  4. Q: Can TAS5616PHD be used in both consumer and professional audio applications? A: Yes, TAS5616PHD is suitable for a wide range of applications, including home theater systems, soundbars, active speakers, and professional audio equipment.

  5. Q: Does TAS5616PHD support multiple input formats? A: Yes, TAS5616PHD supports various input formats, including I2S, TDM, and PDM, making it compatible with different audio sources.

  6. Q: Is TAS5616PHD capable of driving subwoofers? A: Yes, TAS5616PHD has a built-in bass management system that allows it to drive subwoofers effectively.

  7. Q: Can TAS5616PHD operate at high temperatures? A: Yes, TAS5616PHD is designed to operate reliably at elevated temperatures, making it suitable for demanding environments.

  8. Q: Does TAS5616PHD require external components for operation? A: TAS5616PHD requires a few external components, such as power supply circuitry, input/output filters, and protection circuits, to function properly.

  9. Q: Are there any evaluation boards or reference designs available for TAS5616PHD? A: Yes, Texas Instruments provides evaluation boards and reference designs that can help developers quickly prototype and implement TAS5616PHD-based solutions.

  10. Q: Where can I find more technical information about TAS5616PHD? A: You can find detailed technical documentation, including datasheets, application notes, and design resources, on the Texas Instruments website or by contacting their technical support team.