Texas Instruments
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
TLV2461QDR
Se detaljer DataSheets

TLV2461QDR

Product Overview

Category

TLV2461QDR belongs to the category of operational amplifiers (op-amps).

Use

This product is commonly used in various electronic circuits where amplification and signal conditioning are required.

Characteristics

  • Low power consumption
  • Rail-to-rail input and output operation
  • High gain bandwidth product
  • Low input offset voltage
  • Wide supply voltage range

Package

TLV2461QDR is available in a small outline package (SOIC) with eight pins.

Essence

The essence of TLV2461QDR lies in its ability to amplify and condition electrical signals accurately and efficiently.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel or 98 units per tube.

Specifications

  • Supply Voltage Range: 2.7V to 6V
  • Input Offset Voltage: 500µV (maximum)
  • Gain Bandwidth Product: 10MHz
  • Slew Rate: 3.5V/µs
  • Input Bias Current: 1pA (typical)
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. OUT: Output pin
  2. IN-: Inverting input pin
  3. IN+: Non-inverting input pin
  4. V-: Negative power supply pin
  5. NC: No connection
  6. V+: Positive power supply pin
  7. NC: No connection
  8. GND: Ground pin

Functional Features

  • Low noise and distortion
  • High open-loop gain
  • Unity-gain stable
  • ESD protection on all pins
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Low power consumption extends battery life in portable applications.
  • Rail-to-rail operation allows for maximum dynamic range.
  • Wide supply voltage range enhances versatility.
  • High gain bandwidth product enables accurate signal amplification.

Disadvantages

  • Limited output current capability may restrict use in certain applications.
  • Higher input offset voltage compared to some alternative models.

Working Principles

TLV2461QDR operates based on the principles of operational amplifiers. It amplifies the difference between its two input voltages and produces an output voltage that is proportional to this difference, while maintaining a high gain and low distortion.

Detailed Application Field Plans

TLV2461QDR finds application in various fields, including: 1. Audio amplification circuits 2. Sensor signal conditioning 3. Active filters 4. Data acquisition systems 5. Medical instrumentation

Detailed and Complete Alternative Models

Some alternative models to TLV2461QDR include: 1. LM358 2. MCP6001 3. AD822 4. LT1498 5. MAX4239

These models offer similar functionality and can be considered as alternatives depending on specific requirements.

Word count: 314 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af TLV2461QDR i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of TLV2461QDR in technical solutions:

1. What is TLV2461QDR? TLV2461QDR is a low-power, rail-to-rail input/output operational amplifier (op-amp) that is commonly used in various electronic applications.

2. What is the supply voltage range for TLV2461QDR? The supply voltage range for TLV2461QDR is typically between 2.7V and 6V.

3. What is the input voltage range for TLV2461QDR? The input voltage range for TLV2461QDR extends from the negative supply voltage (V-) to the positive supply voltage (V+).

4. What is the typical gain bandwidth product of TLV2461QDR? The typical gain bandwidth product of TLV2461QDR is around 1 MHz.

5. Can TLV2461QDR operate with a single power supply? Yes, TLV2461QDR can operate with a single power supply, as it has rail-to-rail input/output capability.

6. What is the quiescent current consumption of TLV2461QDR? The quiescent current consumption of TLV2461QDR is typically very low, around 900 nA.

7. Is TLV2461QDR suitable for battery-powered applications? Yes, TLV2461QDR is well-suited for battery-powered applications due to its low power consumption.

8. What is the output voltage swing of TLV2461QDR? The output voltage swing of TLV2461QDR is typically within a few millivolts of the supply rails.

9. Can TLV2461QDR drive capacitive loads? Yes, TLV2461QDR can drive capacitive loads up to a certain limit, but it is recommended to use an external compensation capacitor for stability.

10. What are some typical applications of TLV2461QDR? TLV2461QDR is commonly used in applications such as sensor interfaces, battery-powered systems, portable instrumentation, and audio amplification.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.