TLV2463AQDG4
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Low-power, Rail-to-Rail Input/Output, Precision
- Package: 8-pin SOIC (Small Outline Integrated Circuit)
- Essence: TLV2463AQDG4 is a precision operational amplifier designed for low-power applications. It offers rail-to-rail input and output capabilities, making it suitable for a wide range of voltage sensing and signal conditioning applications.
- Packaging/Quantity: TLV2463AQDG4 is available in tape and reel packaging with 2500 units per reel.
Specifications
- Supply Voltage: ±1.35 V to ±6 V
- Input Offset Voltage: 500 µV (max)
- Input Bias Current: 1 pA (typ)
- Gain Bandwidth Product: 2.8 MHz (typ)
- Slew Rate: 1.6 V/µs (typ)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The TLV2463AQDG4 has the following pin configuration:
___________
OUT | 1 8 | VCC+
IN- | 2 7 | IN+
IN+ | 3 6 | VCC-
GND | 4 5 | OUT
‾‾‾‾‾‾‾‾‾‾‾
Functional Features
- Low-power consumption: TLV2463AQDG4 operates at a low supply voltage and consumes minimal power, making it ideal for battery-powered devices.
- Rail-to-rail input/output: The operational amplifier can accept and deliver signals that are close to the supply voltage rails, maximizing dynamic range and signal fidelity.
- Precision: With low input offset voltage and bias current, TLV2463AQDG4 provides accurate amplification of small signals.
Advantages and Disadvantages
Advantages: - Low power consumption - Rail-to-rail input/output - Precision amplification
Disadvantages: - Limited gain bandwidth product compared to higher-end operational amplifiers - Not suitable for high-frequency applications
Working Principles
The TLV2463AQDG4 is based on a differential amplifier configuration. It amplifies the voltage difference between its non-inverting (IN+) and inverting (IN-) inputs. The amplified output is then available at the OUT pin. By adjusting the feedback network, the gain and behavior of the amplifier can be tailored to specific application requirements.
Detailed Application Field Plans
TLV2463AQDG4 can be used in various applications, including but not limited to: 1. Sensor signal conditioning 2. Battery-powered instrumentation 3. Audio amplification 4. Active filters 5. Data acquisition systems
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to TLV2463AQDG4 are: - LMV321 - MCP6002 - MAX4239
These alternatives can be considered based on specific application requirements and availability.
Word count: 314 words
Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af TLV2463AQDG4 i tekniske løsninger
Sure! Here are 10 common questions and answers related to the application of TLV2463AQDG4 in technical solutions:
Q: What is TLV2463AQDG4? A: TLV2463AQDG4 is a low-power, rail-to-rail input/output operational amplifier (op-amp) designed for general-purpose applications.
Q: What is the supply voltage range for TLV2463AQDG4? A: The supply voltage range for TLV2463AQDG4 is typically between 2.7V and 5.5V.
Q: What is the input voltage range of TLV2463AQDG4? A: The input voltage range of TLV2463AQDG4 extends from the negative supply voltage (V-) to the positive supply voltage (V+).
Q: Can TLV2463AQDG4 operate with a single power supply? A: Yes, TLV2463AQDG4 can operate with a single power supply, as it has rail-to-rail input and output capabilities.
Q: What is the typical gain bandwidth product (GBWP) of TLV2463AQDG4? A: The typical GBWP of TLV2463AQDG4 is around 2 MHz.
Q: Is TLV2463AQDG4 suitable for low-power applications? A: Yes, TLV2463AQDG4 is designed for low-power applications, consuming very little current.
Q: Can TLV2463AQDG4 be used in precision measurement circuits? A: Yes, TLV2463AQDG4 offers low offset voltage and low input bias current, making it suitable for precision measurement circuits.
Q: Does TLV2463AQDG4 have built-in protection features? A: Yes, TLV2463AQDG4 has built-in electrostatic discharge (ESD) protection and short-circuit protection.
Q: What is the temperature range for TLV2463AQDG4? A: TLV2463AQDG4 can operate within a temperature range of -40°C to 125°C.
Q: Can TLV2463AQDG4 be used in audio applications? A: Yes, TLV2463AQDG4 can be used in audio applications due to its low noise and wide bandwidth characteristics.
Please note that these answers are general and may vary depending on specific application requirements.