Texas Instruments
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
TPS2592BADRCR
Se detaljer DataSheets

TPS2592BADRCR

Product Overview

Category

The TPS2592BADRCR belongs to the category of electronic components, specifically power management integrated circuits (PMICs).

Use

This product is primarily used for overvoltage and overcurrent protection in various electronic systems.

Characteristics

  • Overvoltage and overcurrent protection
  • Low quiescent current
  • Fast response time
  • Wide input voltage range
  • Adjustable overvoltage threshold
  • Thermal shutdown protection

Package

The TPS2592BADRCR is available in a small outline package (SOP) with 8 pins.

Essence

The essence of the TPS2592BADRCR lies in its ability to safeguard electronic devices from potential damage caused by excessive voltage or current.

Packaging/Quantity

The TPS2592BADRCR is typically packaged in reels and is available in quantities of 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 18V
  • Overvoltage Threshold Range: 2.9V to 5.5V
  • Overcurrent Threshold Range: 0.1A to 3.5A
  • Quiescent Current: 10µA (typical)
  • Response Time: <1µs
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The TPS2592BADRCR has the following pin configuration:

  1. EN (Enable): Controls the device's operation.
  2. IN (Input): Connects to the power source.
  3. OUT (Output): Connects to the load.
  4. GND (Ground): Provides the reference ground for the device.
  5. OV (Overvoltage): Monitors the input voltage level.
  6. OC (Overcurrent): Monitors the output current level.
  7. FLT (Fault): Indicates the occurrence of a fault condition.
  8. PG (Power Good): Provides an indication of the output voltage status.

Functional Features

  • Overvoltage Protection: Monitors the input voltage and disconnects the load when it exceeds the set threshold.
  • Overcurrent Protection: Monitors the output current and disconnects the load when it exceeds the set threshold.
  • Fast Response Time: Quickly detects and responds to overvoltage and overcurrent conditions, minimizing potential damage.
  • Adjustable Thresholds: Allows customization of the overvoltage and overcurrent protection levels.
  • Thermal Shutdown Protection: Automatically shuts down the device in case of excessive temperature.

Advantages and Disadvantages

Advantages

  • Effective protection against overvoltage and overcurrent events.
  • Low quiescent current minimizes power consumption.
  • Wide input voltage range enables compatibility with various power sources.
  • Adjustable thresholds provide flexibility for different applications.
  • Fast response time ensures prompt protection activation.

Disadvantages

  • Limited to SOP package option.
  • Requires external components for complete circuit implementation.
  • May not be suitable for high-power applications.

Working Principles

The TPS2592BADRCR operates based on a combination of voltage and current monitoring. It continuously monitors the input voltage and output current levels. When the input voltage exceeds the set overvoltage threshold or the output current surpasses the overcurrent threshold, the device quickly disconnects the load from the power source to prevent any potential damage. The adjustable thresholds allow customization according to specific application requirements. Additionally, the device incorporates thermal shutdown protection to safeguard against excessive temperature.

Detailed Application Field Plans

The TPS2592BADRCR finds applications in various electronic systems that require reliable overvoltage and overcurrent protection. Some potential application fields include:

  1. Consumer Electronics: Protecting smartphones, tablets, and other portable devices from power surges and short circuits.
  2. Automotive Electronics: Safeguarding automotive control units, infotainment systems, and lighting modules from voltage spikes and excessive current.
  3. Industrial Automation: Ensuring the protection of sensitive equipment, such as PLCs (Programmable Logic Controllers) and motor drives, against electrical faults.
  4. Power Supplies: Preventing damage to power supply units caused by overvoltage or overcurrent events.

Detailed and Complete Alternative Models

  1. TPS2595BADRCR: Similar to TPS2592BADRCR but with additional reverse current protection feature.
  2. TPS2593BADRCR: Similar to TPS2592BADRCR but with higher overcurrent threshold range.
  3. TPS2594BADRCR: Similar to TPS2592BADRCR but with lower quiescent current and wider operating temperature range.

These alternative models offer similar functionalities with slight variations to cater to different application requirements.

Word count: 570 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af TPS2592BADRCR i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of TPS2592BADRCR in technical solutions:

  1. Q: What is the TPS2592BADRCR? A: The TPS2592BADRCR is a power distribution switch with an integrated current-limiting feature, designed for use in various technical solutions.

  2. Q: What is the maximum input voltage supported by the TPS2592BADRCR? A: The TPS2592BADRCR can handle input voltages up to 18V.

  3. Q: What is the purpose of the current-limiting feature in the TPS2592BADRCR? A: The current-limiting feature protects the system from excessive current draw, preventing damage to the components.

  4. Q: Can the TPS2592BADRCR be used in battery-powered applications? A: Yes, the TPS2592BADRCR is suitable for battery-powered applications as it has a low quiescent current and supports low-voltage operation.

  5. Q: How much current can the TPS2592BADRCR handle? A: The TPS2592BADRCR can handle a continuous current of up to 3A.

  6. Q: Does the TPS2592BADRCR have any thermal protection features? A: Yes, the TPS2592BADRCR includes thermal shutdown protection to prevent overheating.

  7. Q: Can the TPS2592BADRCR be used in automotive applications? A: Yes, the TPS2592BADRCR is automotive-grade and can be used in automotive applications.

  8. Q: What is the operating temperature range of the TPS2592BADRCR? A: The TPS2592BADRCR has an operating temperature range of -40°C to 85°C.

  9. Q: Does the TPS2592BADRCR have any built-in fault reporting features? A: Yes, the TPS2592BADRCR provides fault reporting through a dedicated open-drain fault output pin.

  10. Q: Can the TPS2592BADRCR be used in high-reliability applications? A: Yes, the TPS2592BADRCR is designed for high-reliability applications and has a high level of protection features.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.