The TPS3823-30QDBVRQ1 belongs to the category of voltage supervisors.
It is primarily used for monitoring and supervising the voltage levels in electronic systems.
The TPS3823-30QDBVRQ1 is available in a small SOT-23-6 package.
The essence of the TPS3823-30QDBVRQ1 is its ability to provide accurate voltage monitoring and supervision, ensuring proper functioning of electronic systems.
The TPS3823-30QDBVRQ1 is typically packaged in reels containing 3000 units.
The TPS3823-30QDBVRQ1 has the following pin configuration:
The TPS3823-30QDBVRQ1 works by continuously monitoring the supply voltage. When the voltage drops below the preset threshold (3.0V), the device triggers a reset signal, indicating a power-on reset condition. The reset output remains active until the supply voltage rises above the threshold and the reset delay time elapses.
The TPS3823-30QDBVRQ1 finds applications in various fields, including:
These alternative models offer similar functionality and can be considered based on specific application requirements.
Word count: 440 words
Sure! Here are 10 common questions and answers related to the application of TPS3823-30QDBVRQ1 in technical solutions:
1. What is TPS3823-30QDBVRQ1? - TPS3823-30QDBVRQ1 is a voltage supervisor and reset IC manufactured by Texas Instruments.
2. What is the purpose of TPS3823-30QDBVRQ1? - The purpose of TPS3823-30QDBVRQ1 is to monitor the power supply voltage and generate a reset signal when the voltage falls below a certain threshold.
3. What is the operating voltage range of TPS3823-30QDBVRQ1? - The operating voltage range of TPS3823-30QDBVRQ1 is from 1.6V to 6.5V.
4. What is the typical reset threshold voltage of TPS3823-30QDBVRQ1? - The typical reset threshold voltage of TPS3823-30QDBVRQ1 is 3.0V.
5. Can TPS3823-30QDBVRQ1 be used in automotive applications? - Yes, TPS3823-30QDBVRQ1 is specifically designed for automotive applications and meets the AEC-Q100 Grade 1 qualification.
6. Does TPS3823-30QDBVRQ1 have a manual reset input? - No, TPS3823-30QDBVRQ1 does not have a manual reset input. It generates a reset signal automatically based on the monitored voltage.
7. What is the typical reset timeout period of TPS3823-30QDBVRQ1? - The typical reset timeout period of TPS3823-30QDBVRQ1 is 200ms.
8. Can TPS3823-30QDBVRQ1 be used in battery-powered applications? - Yes, TPS3823-30QDBVRQ1 can be used in battery-powered applications as it has a low quiescent current of typically 5µA.
9. What is the package type of TPS3823-30QDBVRQ1? - TPS3823-30QDBVRQ1 is available in a SOT-23-6 package.
10. Is TPS3823-30QDBVRQ1 RoHS compliant? - Yes, TPS3823-30QDBVRQ1 is RoHS compliant and does not contain any hazardous substances.
Please note that these answers are based on general information about TPS3823-30QDBVRQ1 and may vary depending on specific application requirements.