Texas Instruments
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
UCC3912DP
Se detaljer DataSheets

UCC3912DP

Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - Low-power, high-voltage, synchronous buck controller - Designed for use in power supply applications - Provides efficient and reliable power conversion

Package: Dual-In-Line Package (DIP)

Essence: The UCC3912DP is a versatile IC that enables efficient power management in various applications.

Packaging/Quantity: Available in tubes or reels, with 25 pieces per tube/reel.

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Switching Frequency: 1MHz
  • Operating Temperature Range: -40°C to +125°C
  • Number of Pins: 16

Pin Configuration

The UCC3912DP has the following pin configuration:

  1. VCC: Supply voltage input
  2. GND: Ground reference
  3. FB: Feedback voltage input
  4. COMP: Compensation node for feedback control
  5. SS/TR: Soft-start and tracking control
  6. RT/CT: Timing components for frequency control
  7. SYNC: Synchronization input
  8. EN: Enable control input
  9. PGND: Power ground reference
  10. SW: Switching node connection
  11. BOOT: Bootstrap capacitor connection
  12. PHASE: Phase node connection
  13. VREF: Reference voltage output
  14. UVLO: Undervoltage lockout control
  15. OCSET: Overcurrent protection threshold setting
  16. SS/TR: Soft-start and tracking control

Functional Features

  • Wide input voltage range allows for versatile applications
  • High switching frequency enables efficient power conversion
  • Synchronous buck topology ensures low power dissipation
  • Soft-start and tracking control for smooth power-up and operation
  • Overcurrent protection safeguards the system from excessive current

Advantages

  • High efficiency in power conversion
  • Wide input voltage range allows for flexibility in applications
  • Compact DIP package for easy integration into various systems
  • Reliable and robust performance
  • Comprehensive protection features ensure system safety

Disadvantages

  • Limited output voltage range compared to some other ICs
  • Requires external components for proper operation
  • Higher cost compared to non-synchronous buck controllers

Working Principles

The UCC3912DP operates on the principle of synchronous buck conversion. It uses a high-frequency switching circuit to convert the input voltage to the desired output voltage with minimal power loss. The feedback control mechanism ensures stable and accurate output voltage regulation.

Application Field Plans

The UCC3912DP is suitable for a wide range of power supply applications, including but not limited to: - Industrial equipment - Automotive electronics - Telecommunications systems - Renewable energy systems - Consumer electronics

Alternative Models

  1. UCC3913DP: Similar specifications and features, with additional protection mechanisms.
  2. UCC3914DP: Higher output voltage range and increased current handling capability.
  3. UCC3915DP: Lower input voltage range and optimized for battery-powered applications.

These alternative models provide options based on specific application requirements while maintaining similar functionality to the UCC3912DP.

In conclusion, the UCC3912DP is a versatile and efficient power management IC that offers reliable performance in various applications. Its wide input voltage range, high switching frequency, and comprehensive protection features make it an ideal choice for power supply designs.

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af UCC3912DP i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of UCC3912DP in technical solutions:

  1. Q: What is UCC3912DP? A: UCC3912DP is a specific integrated circuit (IC) used for battery management applications.

  2. Q: What are the key features of UCC3912DP? A: Some key features of UCC3912DP include overvoltage protection, undervoltage lockout, temperature monitoring, and cell balancing.

  3. Q: How does UCC3912DP provide overvoltage protection? A: UCC3912DP monitors the voltage levels of individual cells in a battery pack and disconnects the charging source if any cell exceeds the specified overvoltage threshold.

  4. Q: Can UCC3912DP handle multiple battery chemistries? A: Yes, UCC3912DP is designed to work with various battery chemistries such as lithium-ion, lithium-polymer, and lead-acid batteries.

  5. Q: Does UCC3912DP support cell balancing? A: Yes, UCC3912DP has built-in cell balancing functionality that equalizes the charge levels of individual cells in a battery pack.

  6. Q: How does UCC3912DP perform undervoltage lockout? A: UCC3912DP monitors the voltage levels of individual cells and disconnects the load if any cell drops below the specified undervoltage threshold.

  7. Q: Can UCC3912DP measure battery temperature? A: Yes, UCC3912DP includes a temperature sensor that can monitor the temperature of the battery pack.

  8. Q: Is UCC3912DP suitable for automotive applications? A: Yes, UCC3912DP is commonly used in automotive applications due to its robustness and ability to handle high-voltage environments.

  9. Q: What is the maximum voltage rating of UCC3912DP? A: The maximum voltage rating of UCC3912DP is typically around 60V, but it may vary depending on the specific manufacturer's datasheet.

  10. Q: Are there any evaluation boards available for UCC3912DP? A: Yes, many manufacturers offer evaluation boards that allow engineers to test and evaluate the performance of UCC3912DP in their specific applications.

Please note that the answers provided here are general and may vary based on the specific datasheet and application requirements. It is always recommended to refer to the manufacturer's documentation for accurate and detailed information.