XC6118C17AMR-G belongs to the category of voltage regulators.
It is commonly used for regulating voltage in electronic circuits.
The specifications of XC6118C17AMR-G are as follows:
XC6118C17AMR-G has a total of five pins arranged as follows:
```
| | --| |-- |____| ```
Pin Configuration: 1. VIN: Input Voltage 2. GND: Ground 3. EN: Enable Pin 4. NC: No Connection 5. VOUT: Output Voltage
Advantages: - Low power consumption - Small package size - Wide operating temperature range - Short-circuit and thermal protection
Disadvantages: - Limited output current capacity - Fixed output voltage
XC6118C17AMR-G is a linear voltage regulator that operates by maintaining a constant output voltage regardless of changes in the input voltage or load conditions. It achieves this by using a feedback mechanism to adjust the internal pass transistor, ensuring a stable output voltage.
XC6118C17AMR-G finds applications in various electronic devices and circuits where a stable and regulated voltage is required. Some of the common application fields include:
Some alternative models that can be considered as alternatives to XC6118C17AMR-G are:
These alternative models offer similar functionality and characteristics, providing options for different design requirements.
In conclusion, XC6118C17AMR-G is a low power consumption voltage regulator with a fixed output voltage of 1.7V. It is commonly used in various electronic devices and offers advantages such as low power consumption, small package size, and wide operating temperature range. However, it has limitations in terms of output current capacity and fixed output voltage.
Sure! Here are 10 common questions and answers related to the application of XC6118C17AMR-G in technical solutions:
Q: What is XC6118C17AMR-G? A: XC6118C17AMR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C17AMR-G? A: The operating voltage range of XC6118C17AMR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C17AMR-G help in technical solutions? A: XC6118C17AMR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning caused by low voltage conditions.
Q: Can XC6118C17AMR-G be used in battery-powered applications? A: Yes, XC6118C17AMR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the typical reset threshold voltage of XC6118C17AMR-G? A: The typical reset threshold voltage of XC6118C17AMR-G is 1.7V.
Q: Does XC6118C17AMR-G have an adjustable reset threshold voltage? A: No, XC6118C17AMR-G has a fixed reset threshold voltage of 1.7V.
Q: Can XC6118C17AMR-G generate an active-low reset signal? A: Yes, XC6118C17AMR-G generates an active-low reset signal when the voltage drops below the reset threshold.
Q: What is the typical response time of XC6118C17AMR-G? A: The typical response time of XC6118C17AMR-G is 20ms.
Q: Is XC6118C17AMR-G available in different package options? A: Yes, XC6118C17AMR-G is available in a variety of package options, such as SOT-23 and USP-4.
Q: Can XC6118C17AMR-G be used in automotive applications? A: Yes, XC6118C17AMR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C17AMR-G.