XC6118N18AMR-G belongs to the category of voltage regulators.
It is used to regulate and stabilize the voltage in electronic circuits.
XC6118N18AMR-G comes in a small surface-mount package.
The essence of XC6118N18AMR-G is to provide a stable and regulated voltage supply to electronic devices.
XC6118N18AMR-G is typically packaged in reels and is available in quantities of 1000 units per reel.
XC6118N18AMR-G has the following pin configuration:
XC6118N18AMR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations and load changes.
XC6118N18AMR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Some alternative models that can be considered as alternatives to XC6118N18AMR-G are: - XC6206P182MR - LM1117IMPX-1.8/NOPB - MCP1700T-1802E/TT
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 320 words
Sure! Here are 10 common questions and answers related to the application of XC6118N18AMR-G in technical solutions:
Q: What is XC6118N18AMR-G? A: XC6118N18AMR-G is a voltage detector IC manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6118N18AMR-G? A: The operating voltage range of XC6118N18AMR-G is typically between 0.7V and 6.0V.
Q: How does XC6118N18AMR-G work? A: XC6118N18AMR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal indicating a low voltage condition.
Q: What is the output type of XC6118N18AMR-G? A: XC6118N18AMR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.
Q: What is the typical quiescent current of XC6118N18AMR-G? A: The typical quiescent current of XC6118N18AMR-G is around 1.0µA, making it suitable for low-power applications.
Q: Can XC6118N18AMR-G be used for overvoltage protection? A: No, XC6118N18AMR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.
Q: What is the accuracy of the voltage detection threshold in XC6118N18AMR-G? A: The accuracy of the voltage detection threshold in XC6118N18AMR-G is typically ±1.5%.
Q: Can XC6118N18AMR-G be used in automotive applications? A: Yes, XC6118N18AMR-G is AEC-Q100 qualified and can be used in automotive applications that require undervoltage monitoring.
Q: Does XC6118N18AMR-G have built-in hysteresis? A: Yes, XC6118N18AMR-G has a built-in hysteresis of typically 50mV, which helps to prevent oscillation near the detection threshold.
Q: What is the package type of XC6118N18AMR-G? A: XC6118N18AMR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.