Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
XC6118N30AMR-G

XC6118N30AMR-G

Product Overview

Category

XC6118N30AMR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact package size
  • Low power consumption
  • High efficiency

Package

XC6118N30AMR-G is available in a small surface mount package.

Essence

The essence of XC6118N30AMR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.0V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 25μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N30AMR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6118N30AMR-G ensures a stable output voltage of 3.0V regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: The regulator automatically shuts down in case of excessive temperature to prevent damage.
  • Low quiescent current: The low quiescent current ensures minimal power consumption when the load is light.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Efficient voltage regulation ensures reliable performance of connected devices.
  • Low power consumption helps prolong battery life in portable applications.

Disadvantages

  • Limited output current of 100mA may not be suitable for high-power applications.
  • Dropout voltage of 200mV may result in a slight voltage drop across the regulator.

Working Principles

XC6118N30AMR-G operates based on the principle of linear voltage regulation. It utilizes a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output voltage of 3.0V.

Detailed Application Field Plans

XC6118N30AMR-G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N30AMR-G are: - XC6206P302MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6118N30AMR-G is a voltage regulator that provides stable and regulated voltage output. Its compact size, low power consumption, and efficient voltage regulation make it suitable for various electronic applications. However, its limited output current and dropout voltage should be taken into consideration when selecting this product for high-power applications.

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af XC6118N30AMR-G i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of XC6118N30AMR-G in technical solutions:

  1. Q: What is XC6118N30AMR-G? A: XC6118N30AMR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118N30AMR-G? A: The operating voltage range of XC6118N30AMR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118N30AMR-G help in technical solutions? A: XC6118N30AMR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: Can XC6118N30AMR-G be used in battery-powered applications? A: Yes, XC6118N30AMR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the typical reset threshold voltage of XC6118N30AMR-G? A: The typical reset threshold voltage of XC6118N30AMR-G is 3.0V.

  6. Q: Does XC6118N30AMR-G have an adjustable reset threshold voltage? A: No, XC6118N30AMR-G has a fixed reset threshold voltage of 3.0V.

  7. Q: What is the output type of XC6118N30AMR-G? A: XC6118N30AMR-G has an open-drain output type, which requires an external pull-up resistor.

  8. Q: Can XC6118N30AMR-G be used in automotive applications? A: Yes, XC6118N30AMR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Q: What is the operating temperature range of XC6118N30AMR-G? A: The operating temperature range of XC6118N30AMR-G is typically between -40°C and +85°C.

  10. Q: Is XC6118N30AMR-G available in different package options? A: Yes, XC6118N30AMR-G is available in various package options, such as SOT-23-5 and USP-6B.