Torex Semiconductor Ltd
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
XC6122E639MR-G
Se detaljer DataSheets

XC6122E639MR-G

Product Overview

Category

XC6122E639MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 150mA
  • Low Quiescent Current: 1.0µA (typical)
  • Low Dropout Voltage: 160mV at 100mA (typical)
  • High Ripple Rejection Ratio: 70dB at 1kHz (typical)

Package

XC6122E639MR-G comes in a small SOT-23-5 package.

Essence

The essence of XC6122E639MR-G is its ability to provide stable and regulated voltage output, ensuring reliable operation of electronic devices.

Packaging/Quantity

It is typically available in reels containing 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Output Current: 150mA (maximum)
  • Quiescent Current: 1.0µA (typical)
  • Dropout Voltage: 160mV at 100mA (typical)
  • Ripple Rejection Ratio: 70dB at 1kHz (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122E639MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. NC: No connection pin
  4. VOUT: Output voltage pin
  5. EN: Enable pin

Functional Features

  • Low quiescent current ensures minimal power consumption in standby mode.
  • High ripple rejection ratio reduces noise and interference in the output voltage.
  • Wide input voltage range allows compatibility with various power sources.
  • Small package size enables space-saving integration into compact electronic devices.

Advantages and Disadvantages

Advantages

  • Low quiescent current minimizes power consumption.
  • High ripple rejection ratio ensures clean output voltage.
  • Wide input voltage range provides flexibility in power source selection.
  • Small package size allows for easy integration into space-constrained designs.

Disadvantages

  • Maximum output current of 150mA may not be sufficient for high-power applications.
  • Dropout voltage of 160mV at 100mA may cause a slight voltage drop in certain scenarios.

Working Principles

XC6122E639MR-G operates based on a voltage regulation principle. It uses internal circuitry to compare the input voltage with a reference voltage and adjusts the output voltage accordingly. By maintaining a stable output voltage, it ensures proper functioning of connected electronic components.

Detailed Application Field Plans

XC6122E639MR-G finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Wearable devices - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6122E639MR-G include: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6223B332MR-G

These alternatives can be considered based on specific requirements and design constraints.

Word count: 400 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af XC6122E639MR-G i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of XC6122E639MR-G in technical solutions:

  1. Question: What is XC6122E639MR-G?
    - Answer: XC6122E639MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is used to monitor the power supply voltage and provide a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6122E639MR-G?
    - Answer: The operating voltage range of XC6122E639MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122E639MR-G work?
    - Answer: XC6122E639MR-G works by comparing the input voltage with a reference voltage. When the input voltage falls below the reference voltage, it triggers the reset output.

  4. Question: What is the typical reset threshold voltage of XC6122E639MR-G?
    - Answer: The typical reset threshold voltage of XC6122E639MR-G is 2.93V.

  5. Question: Can XC6122E639MR-G be used in battery-powered applications?
    - Answer: Yes, XC6122E639MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0μA.

  6. Question: Does XC6122E639MR-G have built-in hysteresis?
    - Answer: Yes, XC6122E639MR-G has built-in hysteresis which helps prevent chattering or oscillation of the reset output near the threshold voltage.

  7. Question: What is the maximum reset output sink current of XC6122E639MR-G?
    - Answer: The maximum reset output sink current of XC6122E639MR-G is typically 5mA.

  8. Question: Can XC6122E639MR-G be used in automotive applications?
    - Answer: Yes, XC6122E639MR-G is AEC-Q100 qualified and can be used in automotive applications.

  9. Question: Does XC6122E639MR-G have a built-in delay circuit?
    - Answer: No, XC6122E639MR-G does not have a built-in delay circuit. If a delay is required, an external capacitor can be connected to the CT pin.

  10. Question: What is the package type of XC6122E639MR-G?
    - Answer: XC6122E639MR-G is available in a SOT-25 package.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.