Torex Semiconductor Ltd
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
XC6123A427MR-G
Se detaljer DataSheets

XC6123A427MR-G

Product Overview

Category

XC6123A427MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6123A427MR-G is available in a small surface-mount package.

Essence

The essence of XC6123A427MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

The product is typically packaged in reels and comes in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.27V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123A427MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6123A427MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down when the output current exceeds the specified limit, protecting the circuit from damage.
  • Thermal shutdown protection: In case of excessive temperature rise, the regulator enters a thermal shutdown mode to prevent overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for space-saving designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range makes it compatible with various power sources.
  • Overcurrent and thermal shutdown protection enhance circuit reliability.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may affect the efficiency in low input voltage scenarios.

Working Principles

XC6123A427MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6123A427MR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123A427MR-G are: - XC6206P427MR-G - XC6220B427MR-G - XC6219B427MR-G - XC6221B427MR-G - XC6222B427MR-G

These models offer similar functionality and specifications, providing flexibility in design choices.

(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af XC6123A427MR-G i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of XC6123A427MR-G in technical solutions:

  1. Question: What is the XC6123A427MR-G?
    Answer: The XC6123A427MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6123A427MR-G?
    Answer: The XC6123A427MR-G operates within a voltage range of 0.9V to 6.0V.

  3. Question: How does XC6123A427MR-G help in technical solutions?
    Answer: XC6123A427MR-G ensures stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent malfunctioning or data corruption during power fluctuations.

  4. Question: Can XC6123A427MR-G be used in battery-powered applications?
    Answer: Yes, XC6123A427MR-G can be used in battery-powered applications as it has a low quiescent current consumption of only 0.5µA.

  5. Question: What is the typical reset voltage threshold of XC6123A427MR-G?
    Answer: The typical reset voltage threshold of XC6123A427MR-G is 4.27V.

  6. Question: Does XC6123A427MR-G have an adjustable reset voltage threshold?
    Answer: No, XC6123A427MR-G has a fixed reset voltage threshold and cannot be adjusted.

  7. Question: Is XC6123A427MR-G suitable for automotive applications?
    Answer: Yes, XC6123A427MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  8. Question: What is the output type of XC6123A427MR-G?
    Answer: XC6123A427MR-G has an active low open-drain output.

  9. Question: Can XC6123A427MR-G be used in high-temperature environments?
    Answer: Yes, XC6123A427MR-G has a wide operating temperature range of -40°C to +105°C, making it suitable for high-temperature environments.

  10. Question: Is XC6123A427MR-G available in different package options?
    Answer: Yes, XC6123A427MR-G is available in a small SOT-25 package, which makes it suitable for space-constrained applications.

Please note that these answers are based on general information and may vary depending on the specific datasheet and application requirements.