XC6124C437MR-G

Product Overview

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 4.37V
Maximum Output Current: 150mA
Low Dropout Voltage: 200mV (at 100mA)
Low Quiescent Current: 1µA (typical)
Package Type: SOT-23-5
Operating Temperature Range: -40°C to +85°C

Packaging/Quantity

XC6124C437MR-G is available in a SOT-23-5 package. It is typically sold in reels containing a specified quantity of units.

Specifications

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 4.37V ±2%
Output Current: Up to 150mA
Dropout Voltage: 200mV (at 100mA)
Quiescent Current: 1µA (typical)
Line Regulation: ±0.2% (typical)
Load Regulation: ±0.3% (typical)
Ripple Rejection Ratio: 70dB (typical)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6124C437MR-G has five pins arranged as follows: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin 4. NC: No connection pin 5. VOUT: Output voltage pin

Functional Features

Low dropout voltage ensures efficient regulation even with low input voltages.
Low quiescent current minimizes power consumption in standby mode.
Good line and load regulation provide stable output voltage under varying conditions.
High ripple rejection ratio reduces noise interference.

Advantages

Wide input voltage range allows for versatile applications.
Low dropout voltage enables efficient power conversion.
Low quiescent current prolongs battery life in portable devices.
Small package size (SOT-23-5) facilitates space-constrained designs.

Disadvantages

Limited maximum output current may restrict usage in high-power applications.
Output voltage is fixed and cannot be adjusted.

Working Principles

XC6124C437MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6124C437MR-G can be used in various applications, including: 1. Battery-powered devices requiring stable voltage supply. 2. Portable electronic devices such as smartphones, tablets, and wearables. 3. IoT devices and sensors. 4. Automotive electronics. 5. Industrial control systems.

Detailed and Complete Alternative Models

Some alternative models to XC6124C437MR-G are: 1. XC6206P437MR-G: Similar specifications but with a different package type (SOT-89-5). 2. XC6220B437MR-G: Higher maximum output current (300mA) but slightly higher dropout voltage (250mV at 100mA). 3. XC6219B437MR-G: Lower dropout voltage (150mV at 100mA) but lower maximum output current (100mA).

Note: The above alternatives are just examples and not an exhaustive list.

This entry provides an overview of XC6124C437MR-G, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af XC6124C437MR-G i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of XC6124C437MR-G in technical solutions:

Q: What is XC6124C437MR-G? A: XC6124C437MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6124C437MR-G? A: The operating voltage range of XC6124C437MR-G is typically between 0.8V and 6.0V.
Q: How does XC6124C437MR-G help in technical solutions? A: XC6124C437MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level, ensuring proper system initialization.
Q: What is the typical reset voltage threshold of XC6124C437MR-G? A: The typical reset voltage threshold of XC6124C437MR-G is 4.37V.
Q: Can XC6124C437MR-G be used in battery-powered applications? A: Yes, XC6124C437MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.
Q: Does XC6124C437MR-G have any built-in delay function? A: No, XC6124C437MR-G does not have a built-in delay function. It provides an immediate reset signal when the voltage drops below the threshold.
Q: Is XC6124C437MR-G available in different package options? A: Yes, XC6124C437MR-G is available in a SOT-25 package, which is a small surface-mount package with three pins.
Q: Can XC6124C437MR-G be used in automotive applications? A: Yes, XC6124C437MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the maximum operating temperature range of XC6124C437MR-G? A: The maximum operating temperature range of XC6124C437MR-G is typically between -40°C and +85°C.
Q: Is XC6124C437MR-G RoHS compliant? A: Yes, XC6124C437MR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6124C437MR-G.