Torex Semiconductor Ltd
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
XC6124D340ER-G
Se detaljer DataSheets

XC6124D340ER-G

Product Overview

Category

XC6124D340ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High precision
  • Low power consumption
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124D340ER-G comes in a small surface-mount package.

Essence

The essence of XC6124D340ER-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.4V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6124D340ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down if the output current exceeds the specified limit.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High precision ensures accurate voltage regulation.
  • Low power consumption helps conserve energy.
  • Wide input voltage range provides flexibility in various applications.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6124D340ER-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly to regulate the output voltage within the specified range.

Detailed Application Field Plans

XC6124D340ER-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Industrial control systems

Detailed and Complete Alternative Models

  1. XC6124D330ER-G: Similar to XC6124D340ER-G, but with an output voltage of 3.3V.
  2. XC6124D350ER-G: Similar to XC6124D340ER-G, but with an output voltage of 3.5V.
  3. XC6124D320ER-G: Similar to XC6124D340ER-G, but with an output voltage of 3.2V.

These alternative models provide options for different output voltage requirements while maintaining similar characteristics and features.

(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af XC6124D340ER-G i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of XC6124D340ER-G in technical solutions:

  1. Question: What is XC6124D340ER-G?
    - Answer: XC6124D340ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6124D340ER-G?
    - Answer: The operating voltage range of XC6124D340ER-G is from 0.8V to 6.0V.

  3. Question: How does XC6124D340ER-G work?
    - Answer: XC6124D340ER-G continuously monitors the input voltage and compares it with a fixed reference voltage. When the input voltage drops below the reference voltage, an internal reset signal is generated.

  4. Question: What is the purpose of using XC6124D340ER-G in technical solutions?
    - Answer: XC6124D340ER-G is commonly used as a power supply monitoring device to ensure stable operation of microcontrollers, digital circuits, and other electronic systems.

  5. Question: Can XC6124D340ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124D340ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: What is the output type of XC6124D340ER-G?
    - Answer: XC6124D340ER-G has an open-drain output, which allows for flexibility in connecting external components.

  7. Question: What is the typical accuracy of XC6124D340ER-G?
    - Answer: The typical accuracy of XC6124D340ER-G is ±1.0%.

  8. Question: Can XC6124D340ER-G be used for overvoltage protection?
    - Answer: No, XC6124D340ER-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  9. Question: What is the maximum operating temperature range of XC6124D340ER-G?
    - Answer: The maximum operating temperature range of XC6124D340ER-G is from -40°C to +85°C.

  10. Question: Is XC6124D340ER-G available in different package options?
    - Answer: Yes, XC6124D340ER-G is available in a SOT-25 package, which is a small surface-mount package commonly used in electronic applications.

Please note that these answers are general and may vary depending on the specific application and requirements.