XC6124E426MR-G belongs to the category of voltage regulators.
It is used to regulate and stabilize the voltage in electronic circuits.
XC6124E426MR-G comes in a small surface-mount package.
The essence of XC6124E426MR-G is to provide a stable and regulated voltage supply to electronic devices.
It is typically packaged in reels and available in quantities of 3000 units per reel.
XC6124E426MR-G has the following pin configuration:
XC6124E426MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This is achieved through the use of a voltage divider, error amplifier, and pass transistor.
XC6124E426MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Automotive electronics
Some alternative models that can be considered as alternatives to XC6124E426MR-G are: - XC6124C426MR-G: Similar specifications but with a different package size. - XC6124D426MR-G: Higher output current capability. - XC6124F426MR-G: Lower dropout voltage.
These alternative models provide flexibility in choosing the most suitable voltage regulator for specific requirements.
Word count: 346 words
Sure! Here are 10 common questions and answers related to the application of XC6124E426MR-G in technical solutions:
Q: What is XC6124E426MR-G? A: XC6124E426MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6124E426MR-G? A: The operating voltage range of XC6124E426MR-G is from 0.8V to 6.0V.
Q: How does XC6124E426MR-G work? A: XC6124E426MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds the reference voltage, it triggers an output signal.
Q: What is the output type of XC6124E426MR-G? A: XC6124E426MR-G has an open-drain output type, which means it can sink current but cannot source current.
Q: What is the typical quiescent current consumption of XC6124E426MR-G? A: The typical quiescent current consumption of XC6124E426MR-G is around 1.0µA.
Q: Can XC6124E426MR-G be used for overvoltage protection? A: No, XC6124E426MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.
Q: What is the typical reset threshold voltage of XC6124E426MR-G? A: The typical reset threshold voltage of XC6124E426MR-G is 4.26V.
Q: Can XC6124E426MR-G be used in battery-powered applications? A: Yes, XC6124E426MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q: Does XC6124E426MR-G have built-in hysteresis? A: Yes, XC6124E426MR-G has built-in hysteresis of approximately 100mV, which helps to prevent oscillation and false triggering near the threshold voltage.
Q: What is the package type of XC6124E426MR-G? A: XC6124E426MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.