Torex Semiconductor Ltd
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
XC9264A75CER-G
Se detaljer DataSheets

XC9264A75CER-G

Product Overview

  • Category: Integrated Circuit
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low dropout voltage, small package size
  • Package: Ceramic Package
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 0.8V - 5.0V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC9264A75CER-G has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. VOUT: Output Voltage

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • Stable output voltage regardless of input voltage fluctuations.
  • Low quiescent current prolongs battery life in portable devices.
  • Built-in overcurrent protection safeguards the circuit.

Advantages and Disadvantages

Advantages: - High efficiency - Small package size - Wide input voltage range - Low dropout voltage

Disadvantages: - Limited output current capacity - Restricted operating temperature range

Working Principles

The XC9264A75CER-G is a voltage regulator that maintains a stable output voltage despite variations in the input voltage. It achieves this by using an internal reference voltage and feedback mechanism. When the input voltage exceeds the desired output voltage, the regulator reduces it to the required level. Conversely, if the input voltage drops below the desired output voltage, the regulator boosts it to maintain a constant output.

Detailed Application Field Plans

The XC9264A75CER-G is commonly used in various applications, including:

  1. Battery-powered devices: It ensures a stable power supply for portable electronics such as smartphones, tablets, and wearable devices.
  2. Industrial equipment: The voltage regulator is suitable for powering sensors, actuators, and control circuits in industrial automation systems.
  3. Automotive electronics: It provides a reliable power source for automotive components like infotainment systems, lighting modules, and engine control units.

Detailed and Complete Alternative Models

  1. XC6206P332MR-G: Low dropout voltage regulator with a maximum output current of 200mA.
  2. XC6220B332MR-G: Ultra-low quiescent current regulator with an output current of 150mA.
  3. XC6219B332MR-G: High-temperature resistant regulator designed for automotive applications.

These alternative models offer similar functionality and can be considered based on specific requirements.

Word count: 305 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af XC9264A75CER-G i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of XC9264A75CER-G in technical solutions:

  1. Q: What is XC9264A75CER-G? A: XC9264A75CER-G is a voltage regulator IC (integrated circuit) that provides a stable output voltage for various electronic devices.

  2. Q: What is the input voltage range for XC9264A75CER-G? A: The input voltage range for XC9264A75CER-G is typically between 2.5V and 6.0V.

  3. Q: What is the output voltage of XC9264A75CER-G? A: The output voltage of XC9264A75CER-G is fixed at 3.3V.

  4. Q: What is the maximum output current of XC9264A75CER-G? A: The maximum output current of XC9264A75CER-G is 150mA.

  5. Q: Can XC9264A75CER-G be used in battery-powered applications? A: Yes, XC9264A75CER-G can be used in battery-powered applications as it has low quiescent current consumption.

  6. Q: Is XC9264A75CER-G suitable for automotive applications? A: Yes, XC9264A75CER-G is suitable for automotive applications as it meets the required automotive standards.

  7. Q: Does XC9264A75CER-G have built-in overcurrent protection? A: Yes, XC9264A75CER-G has built-in overcurrent protection to safeguard against excessive current flow.

  8. Q: Can XC9264A75CER-G operate in a wide temperature range? A: Yes, XC9264A75CER-G can operate in a wide temperature range, typically from -40°C to +85°C.

  9. Q: Does XC9264A75CER-G require any external components for operation? A: Yes, XC9264A75CER-G requires a few external components such as input/output capacitors and resistors for stability.

  10. Q: Is XC9264A75CER-G available in different package options? A: Yes, XC9264A75CER-G is available in various package options, including SOT-25 and USP-6B, to suit different application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC9264A75CER-G.