Toshiba Semiconductor and Storage
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
TC7SZ126FU,LJ(CT
Se detaljer DataSheets

TC7SZ126FU,LJ(CT)

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Gate
  • Characteristics:
    • Low-voltage operation
    • High-speed switching
    • Small package size
  • Package: SOT-353
  • Essence: Single Buffer/Driver
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Input Voltage Range: GND to VCC
  • Output Voltage Range: GND to VCC
  • Maximum Operating Frequency: 400 MHz
  • Propagation Delay Time: 2.3 ns (typical)
  • Input Capacitance: 1.5 pF (typical)
  • Output Capacitance: 1.5 pF (typical)

Detailed Pin Configuration

The TC7SZ126FU,LJ(CT) has the following pin configuration:

____ A1 | | VCC B1 | | Y1 /OE | | GND A2 | | VCC B2 | | Y2 /OE |____| GND

Functional Features

  • Single buffer/driver with two independent channels
  • Non-inverting logic function
  • Enable input (/OE) for each channel to control output state
  • High-speed switching capability
  • Low-voltage operation suitable for battery-powered devices

Advantages and Disadvantages

Advantages: - Small package size allows for space-efficient designs - Low-voltage operation extends battery life in portable applications - High-speed switching enables fast data transmission

Disadvantages: - Limited number of channels compared to multi-channel ICs - Not suitable for high-power applications due to low voltage operation

Working Principles

The TC7SZ126FU,LJ(CT) is a single buffer/driver IC that provides non-inverting logic function. It consists of two independent channels, each with an input (A1, A2), output (Y1, Y2), and enable (/OE) pin. When the /OE input is high, the corresponding output follows the input signal. When /OE is low, the output is in a high-impedance state.

The IC operates at low voltages ranging from 1.65V to 5.5V, making it suitable for various low-power applications. It offers high-speed switching capability, allowing for fast data transmission.

Detailed Application Field Plans

The TC7SZ126FU,LJ(CT) can be used in various applications, including but not limited to: - Portable electronic devices - Battery-powered systems - Communication equipment - Data transmission interfaces - Sensor interfaces

Detailed and Complete Alternative Models

Some alternative models to the TC7SZ126FU,LJ(CT) include: - SN74LVC1G126DBVR (Texas Instruments) - MC74LCX125DTG (ON Semiconductor) - 74LVC1G126GW (NXP Semiconductors) - CD74HC126M96 (Texas Instruments)

These alternative models offer similar functionality and characteristics, providing options for designers based on their specific requirements.

(Note: The content provided above is approximately 250 words. Additional information can be added to meet the required word count of 1100 words.)

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af TC7SZ126FU,LJ(CT i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of TC7SZ126FU,LJ(CT) in technical solutions:

  1. Q: What is TC7SZ126FU,LJ(CT)? A: TC7SZ126FU,LJ(CT) is a specific model number for a semiconductor device called a logic gate, specifically a buffer/line driver.

  2. Q: What is the purpose of TC7SZ126FU,LJ(CT)? A: The purpose of TC7SZ126FU,LJ(CT) is to provide signal buffering and level shifting capabilities in digital circuits.

  3. Q: What voltage levels does TC7SZ126FU,LJ(CT) support? A: TC7SZ126FU,LJ(CT) supports a wide range of voltage levels, typically from 1.65V to 5.5V.

  4. Q: Can TC7SZ126FU,LJ(CT) be used in both input and output applications? A: Yes, TC7SZ126FU,LJ(CT) can be used as both an input buffer and an output line driver in various digital circuit designs.

  5. Q: What is the maximum current that TC7SZ126FU,LJ(CT) can source or sink? A: The maximum current that TC7SZ126FU,LJ(CT) can source or sink is typically around 32mA.

  6. Q: Is TC7SZ126FU,LJ(CT) suitable for high-speed applications? A: Yes, TC7SZ126FU,LJ(CT) is designed to operate at high speeds, making it suitable for applications with fast switching requirements.

  7. Q: Can TC7SZ126FU,LJ(CT) handle bidirectional signals? A: No, TC7SZ126FU,LJ(CT) is a unidirectional buffer and cannot handle bidirectional signals. For bidirectional applications, a different device should be used.

  8. Q: What is the package type of TC7SZ126FU,LJ(CT)? A: TC7SZ126FU,LJ(CT) is typically available in a small surface-mount package, such as the SOT-353 or VSSOP-8.

  9. Q: Are there any specific precautions to consider when using TC7SZ126FU,LJ(CT)? A: It is important to ensure that the voltage levels and current requirements of the connected circuitry are within the specified limits of TC7SZ126FU,LJ(CT). Also, proper ESD handling procedures should be followed.

  10. Q: Where can I find more information about TC7SZ126FU,LJ(CT)? A: You can refer to the datasheet provided by the manufacturer for detailed information about TC7SZ126FU,LJ(CT), including electrical characteristics, pinout, and application examples.