Vishay Semiconductor Opto Division
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
BPW96B
Se detaljer DataSheets

BPW96B

Product Overview

Category

The BPW96B belongs to the category of photodiodes.

Use

It is used for detecting light and converting it into a current or voltage signal.

Characteristics

  • High sensitivity to light
  • Fast response time
  • Low dark current
  • Wide spectral range

Package

The BPW96B is typically available in a hermetically sealed TO-5 package.

Essence

This photodiode is essential for various light detection and measurement applications.

Packaging/Quantity

The BPW96B is usually sold individually or in small quantities, depending on the supplier.

Specifications

  • Spectral Range: 350nm to 1100nm
  • Dark Current: 2nA
  • Responsivity: 0.62 A/W at 850nm
  • Rise Time: 15ns
  • Capacitance: 25pF

Detailed Pin Configuration

The BPW96B typically has three pins: 1. Anode 2. Cathode 3. Case (connected to the cathode)

Functional Features

  • High sensitivity to a wide range of wavelengths
  • Fast response time for rapid light detection
  • Low dark current for accurate measurements
  • Hermetically sealed package for protection from environmental factors

Advantages and Disadvantages

Advantages

  • Wide spectral range
  • Fast response time
  • Low dark current

Disadvantages

  • Limited to low-frequency applications
  • Susceptible to temperature variations

Working Principles

The BPW96B operates based on the principle of the internal photoelectric effect. When photons strike the diode, electron-hole pairs are generated, resulting in a current flow proportional to the incident light intensity.

Detailed Application Field Plans

The BPW96B is commonly used in the following applications: - Light meters - Optical communication systems - Industrial automation - Medical instruments - Spectroscopy

Detailed and Complete Alternative Models

Some alternative models to the BPW96B include: - BP104 - BPW34 - BPW21

In conclusion, the BPW96B photodiode offers high sensitivity, fast response time, and low dark current, making it suitable for a wide range of light detection applications.

[Word Count: 298]

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af BPW96B i tekniske løsninger

  1. What is BPW96B?

    • BPW96B is a silicon NPN phototransistor used for various sensing applications.

  2. What are the typical applications of BPW96B?

    • BPW96B is commonly used in light barriers, encoders, and reflective sensors.

  3. What is the spectral range of BPW96B?

    • The spectral range of BPW96B is approximately 400nm to 1100nm.

  4. What is the typical collector current of BPW96B?

    • The typical collector current of BPW96B is around 2mA.

  5. What is the operating temperature range of BPW96B?

    • BPW96B can typically operate within a temperature range of -40°C to 100°C.

  6. How does BPW96B respond to different light intensities?

    • BPW96B's collector current increases with increasing light intensity.

  7. Can BPW96B be used in automotive applications?

    • Yes, BPW96B can be used in automotive applications such as wheel speed sensing and position detection.

  8. What are the packaging options available for BPW96B?

    • BPW96B is available in various package types including radial, SMD, and axial.

  9. Does BPW96B require any external amplification circuitry?

    • In most cases, BPW96B requires external amplification circuitry to process its output signal.

  10. Are there any specific precautions to consider when using BPW96B?

    • It's important to protect BPW96B from direct exposure to sunlight and to handle it with care to avoid damage to the sensitive components.