Vishay Siliconix
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
SI9114ADY-E3
Se detaljer DataSheets

SI9114ADY-E3

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: SOIC-8
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 500mA
  • Quiescent Current: 30µA (typical)
  • Dropout Voltage: 200mV at 100mA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SI9114ADY-E3 is an 8-pin integrated circuit with the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. NC: No Connection
  7. NC: No Connection
  8. PGND: Power Ground

Functional Features

  • High efficiency voltage regulation
  • Low power consumption
  • Overcurrent protection
  • Thermal shutdown protection
  • Enable pin for easy control
  • Stable output voltage

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power wastage
  • Wide input voltage range allows for versatile applications
  • Compact package size enables space-saving designs
  • Overcurrent and thermal protection ensure device safety
  • Enable pin provides flexibility in controlling the regulator

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Dropout voltage of 200mV may affect performance in low voltage scenarios

Working Principles

The SI9114ADY-E3 is a voltage regulator that takes an input voltage within the range of 2.7V to 5.5V and provides a regulated output voltage between 1.2V and 5.5V. It operates by using a feedback mechanism to compare the output voltage with a reference voltage, adjusting the internal circuitry to maintain a stable output.

The device incorporates various protection features such as overcurrent and thermal shutdown to prevent damage to the regulator and connected components. The enable pin allows for easy control of the regulator's operation, enabling power savings when not in use.

Detailed Application Field Plans

The SI9114ADY-E3 is commonly used in various applications where efficient voltage regulation is required. Some typical application fields include:

  1. Battery-powered devices: The low quiescent current and wide input voltage range make it suitable for portable electronics, such as smartphones, tablets, and wearables.
  2. IoT devices: With its compact package size and low power consumption, the regulator is ideal for IoT devices that require long battery life and small form factors.
  3. Industrial automation: The stability and reliability of the SI9114ADY-E3 make it suitable for industrial applications, including control systems, sensors, and actuators.
  4. Automotive electronics: The regulator's ability to operate in a wide temperature range makes it suitable for automotive applications, such as infotainment systems, lighting, and power management.

Detailed and Complete Alternative Models

  • LM1117-3.3: A popular alternative with similar specifications and package type.
  • MCP1700-3302E/TO: Another alternative with comparable characteristics and pin configuration.
  • TPS79633DCQR: An alternative offering higher maximum output current and lower dropout voltage.

These alternative models provide similar functionality and can be considered based on specific requirements and availability.

Word count: 480 words

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af SI9114ADY-E3 i tekniske løsninger

Sure! Here are 10 common questions and answers related to the application of SI9114ADY-E3 in technical solutions:

  1. Q: What is SI9114ADY-E3?
    A: SI9114ADY-E3 is a high-performance, integrated circuit (IC) designed for power management and control applications.

  2. Q: What are the key features of SI9114ADY-E3?
    A: SI9114ADY-E3 features include high voltage operation, low quiescent current, adjustable frequency, and built-in protection mechanisms.

  3. Q: What are the typical applications of SI9114ADY-E3?
    A: SI9114ADY-E3 is commonly used in power supplies, LED lighting systems, motor control circuits, and other industrial and consumer electronics applications.

  4. Q: How does SI9114ADY-E3 help in power management?
    A: SI9114ADY-E3 provides efficient power conversion, voltage regulation, and control functions, enabling better energy utilization and improved system performance.

  5. Q: Can SI9114ADY-E3 handle high voltages?
    A: Yes, SI9114ADY-E3 is designed to operate at high voltages, typically up to several hundred volts.

  6. Q: Does SI9114ADY-E3 have any built-in protection features?
    A: Yes, SI9114ADY-E3 incorporates various protection mechanisms such as overvoltage protection, overcurrent protection, and thermal shutdown.

  7. Q: Can SI9114ADY-E3 be used in battery-powered applications?
    A: Yes, SI9114ADY-E3 has a low quiescent current and can be used in battery-powered devices to minimize power consumption.

  8. Q: Is SI9114ADY-E3 programmable?
    A: No, SI9114ADY-E3 is not programmable. However, it offers adjustable frequency control through external components.

  9. Q: What are the advantages of using SI9114ADY-E3 in LED lighting systems?
    A: SI9114ADY-E3 provides precise current regulation, dimming control, and protection features, making it suitable for efficient and reliable LED lighting applications.

  10. Q: Are there any evaluation boards or reference designs available for SI9114ADY-E3?
    A: Yes, the manufacturer provides evaluation boards and reference designs to help users quickly prototype and implement SI9114ADY-E3 in their applications.

Please note that these answers are general and may vary depending on specific application requirements and the manufacturer's documentation.