IXYS
Billedet kan være en repræsentation.
Se specifikationer for produktdetaljer.
IXTH180N10T
Se detaljer DataSheets

IXTH180N10T

Introduction

The IXTH180N10T is a power MOSFET belonging to the category of semiconductor devices. This device is commonly used in various electronic applications due to its unique characteristics and performance.

Basic Information Overview

  • Category: Power MOSFET
  • Use: Switching and amplification in electronic circuits
  • Characteristics: High voltage capability, low on-resistance, fast switching speed
  • Package: TO-220AB
  • Essence: Power management in electronic systems
  • Packaging/Quantity: Typically packaged in reels or tubes, quantity varies based on manufacturer

Specifications

  • Voltage Rating: 100V
  • Current Rating: 180A
  • On-Resistance: 10mΩ
  • Gate Threshold Voltage: 2V
  • Maximum Power Dissipation: 300W
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The IXTH180N10T features a standard TO-220AB package with three pins: 1. Gate (G): Input terminal for controlling the MOSFET 2. Drain (D): Output terminal connected to the load 3. Source (S): Common terminal connected to ground

Functional Features

  • High voltage capability allows for use in various power applications
  • Low on-resistance minimizes power loss and heat generation
  • Fast switching speed enables efficient operation in switching circuits

Advantages and Disadvantages

Advantages

  • High voltage rating suitable for diverse applications
  • Low on-resistance for improved efficiency
  • Fast switching speed for enhanced performance

Disadvantages

  • Higher cost compared to lower-rated MOSFETs
  • Requires careful handling and ESD protection due to sensitivity

Working Principles

The IXTH180N10T operates based on the principle of field-effect transistors, where the gate voltage controls the flow of current between the drain and source terminals. When a sufficient gate voltage is applied, the MOSFET conducts, allowing current to flow through the load.

Detailed Application Field Plans

The IXTH180N10T finds extensive use in the following application fields: - Switching power supplies - Motor control - Inverters - Audio amplifiers - LED lighting

Detailed and Complete Alternative Models

  1. IXTH160N10T: Similar specifications with slightly lower current rating
  2. IXTH200N10T: Similar specifications with higher current rating
  3. IRF1405: Alternative MOSFET with comparable characteristics

In conclusion, the IXTH180N10T power MOSFET offers high voltage capability, low on-resistance, and fast switching speed, making it a versatile component in various electronic applications.

[Word Count: 386]

Liste 10 almindelige spørgsmål og svar relateret til anvendelsen af IXTH180N10T i tekniske løsninger

  1. What is the maximum drain-source voltage of IXTH180N10T?

    • The maximum drain-source voltage of IXTH180N10T is 100V.

  2. What is the continuous drain current rating of IXTH180N10T?

    • The continuous drain current rating of IXTH180N10T is 180A.

  3. What is the on-state resistance (RDS(on)) of IXTH180N10T?

    • The on-state resistance (RDS(on)) of IXTH180N10T is typically 0.009 ohms.

  4. What is the gate threshold voltage of IXTH180N10T?

    • The gate threshold voltage of IXTH180N10T is typically 2.5V.

  5. What are the typical applications for IXTH180N10T?

    • IXTH180N10T is commonly used in high-current switching applications such as motor control, power supplies, and inverters.

  6. What is the operating temperature range of IXTH180N10T?

    • The operating temperature range of IXTH180N10T is -55°C to 175°C.

  7. Does IXTH180N10T require a heat sink for high-power applications?

    • Yes, for high-power applications, it is recommended to use a heat sink to ensure proper thermal management.

  8. Can IXTH180N10T be used in automotive applications?

    • Yes, IXTH180N10T is suitable for automotive applications such as electric vehicle power systems and battery management.

  9. What is the gate charge of IXTH180N10T?

    • The gate charge of IXTH180N10T is typically 150nC.

  10. Is IXTH180N10T RoHS compliant?

    • Yes, IXTH180N10T is RoHS compliant, making it suitable for environmentally conscious designs.